Search

In Stock

TP Dynamometer

Dynamomètre de TP, Integrated Zero-Adjustment Mechanism Enables the technical Evaluation of measurement precision by teaching proper calibration protocols in vocational laboratory training.

Transparent Protective Housing Inoxydable Supports the visual Observation of spring mechanics and internal component behavior, reinforcing foundational physics concepts through empirical evidence.

$6.32

Quick Answer: This spring dynamometer is a force meter for student practical work, in which a calibrated spring stretches in proportion to the pulling force and a scale shows that force in newtons. It is used to measure weights, friction and upthrust in simple mechanics experiments.

How the Spring Measures Force

Inside the meter a steel spring obeys Hooke’s law: within its elastic limit the extension is proportional to the force, F = kx. The scale is graduated so that each extension reads directly in newtons. Because the meter measures force, it reads the weight of an object, not its mass; a 100 g mass gives about 0.98 N on Earth and would give only about a sixth of that on the Moon.

Choosing the right range matters. A meter whose full scale is only slightly above the expected force gives a large, readable movement, while a meter with too large a range barely moves. Pulling beyond the top of the scale can stretch the spring permanently and spoil every later reading.

Technique for Reliable Readings

Set the zero with the meter held in the same orientation in which it will be used. The hook and moving parts have weight of their own, which stretches the spring slightly when the meter hangs vertically but not when it lies flat on the bench. Pull along the axis of the meter so the moving parts do not rub, and read when the indicator is steady.

Two classic practicals show what the meter can do. For friction, a block is pulled across the bench at a steady speed with the meter held level: the steady reading is the sliding friction, and the slightly higher peak just before the block moves is the limiting static friction. For upthrust, an object is weighed in air and again fully submerged in water; the difference equals the weight of the water displaced.

Applications

  • Measuring the weight of objects in newtons
  • Comparing static and sliding friction on different surfaces
  • Finding upthrust as the loss of weight in water
  • Measuring the force needed on a slope or through a pulley system

Specifications

Product Spring dynamometer (force meter) for student practicals
Measures Force in newtons
Principle Hooke’s law: extension proportional to force
Typical uses Weight, friction, upthrust, forces on slopes and pulleys
Range, scale divisions and body style Confirm at enquiry

Care & Handling

  • Never pull beyond the highest value on the scale
  • Release the load gently rather than letting the spring snap back
  • Re-check the zero before each set of readings
  • Store unloaded, away from damp that could rust the spring

Why Choose LabEquip

Schools equipping a class set of mechanics lab equipment need force meters that students can use at every bench for weighing, friction and upthrust. For push as well as pull forces see the push-pull dynamometer, and for a dial version the circular dynamometer for students; contact LabEquip with the ranges you need, or browse more physics lab equipment.

Frequently Asked Questions

Why should the dynamometer be zeroed in the position it will be used in?

The hook and inner parts have weight of their own, which stretches the spring a little when the meter hangs vertically but not when it lies flat. Zeroing in the working orientation removes that offset.

How do I measure friction with the dynamometer?

Pull a block across the bench at a steady speed with the meter held level. The steady reading is the sliding friction; the slightly higher peak just before the block starts to move is the limiting static friction.

How can the dynamometer measure upthrust?

Weigh an object hanging in air, then again fully submerged in water without touching the sides. The difference is the upthrust, which equals the weight of the water displaced.

Which range should I choose?

One whose full scale is a little above the largest force expected. A meter with too large a range gives small, hard-to-read movements, while overloading a small one can stretch the spring permanently.

What does a reading of 1 N correspond to?

Roughly the weight of a 100 g mass on Earth, since weight equals mass times about 9.8 N/kg. The same mass would read about a sixth as much on the Moon.

How do I check that the spring is still accurate?

Hang known masses and compare the readings with their weights. If every reading is off by the same amount, re-zero; if the error grows with load, the spring has been overstretched.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)