Search

In Stock

Thermal Radiation of Hot Bodies Lab

TP Rayonnement thermique des corps chauds (cube de Leslie), Features four distinct 100mm faces, polished brass, matte black, white enamel, and dulled metal, factory-calibrated for comparative thermal flux analysis.

High-Thermal Inertia Construction Manufactured from heavy-gauge copper to ensure uniform internal temperature distribution, minimizing measurement bias during sensitive thermopile data acquisition.

$309.30

Quick Answer: The thermal radiation of hot bodies lab is an experiment set for measuring the infrared radiation given off by heated objects. Students compare how strongly different surfaces radiate at the same temperature and test how the radiated power rises with temperature.

Radiation, Temperature and Surface

Every object above absolute zero emits electromagnetic radiation, and for objects at everyday and oven temperatures most of it lies in the infrared. The Stefan-Boltzmann law states that the power radiated per unit area rises with the fourth power of the absolute temperature, P = εσT⁴, so doubling the absolute temperature multiplies the radiated power by sixteen. The emissivity ε, between 0 and 1, describes how close a surface comes to an ideal black body.

A matt black surface has an emissivity close to 1, while polished metal has a low one. That is why a vacuum flask is silvered and a radiator is painted, and it is the first comparison most students make with this kind of set.

Typical Measurements

A common arrangement uses a hollow cube with four differently finished faces, filled with hot water, and a radiation sensor such as a thermopile placed at a fixed distance in front of each face in turn. The readings show that, at the same temperature, the black face radiates most and the polished face least. As the water cools, readings at several temperatures can be compared with the T⁴ dependence.

A small, very hot source such as a lamp filament allows the Stefan-Boltzmann law to be tested over a wider temperature range, with the filament temperature estimated from its resistance. Moving the sensor away from a small source also tests the inverse square law for radiation. The components included in this set, and so which of these measurements it supports directly, should be checked against its parts list.

Investigations

  • Comparing emission from black, white, matt and polished surfaces
  • Testing the fourth-power dependence of radiated power on temperature
  • Investigating the inverse square law for thermal radiation
  • Explaining design choices in vacuum flasks, radiators and solar collectors

Specifications

Experiment Thermal radiation emitted by hot bodies
Key law Stefan-Boltzmann law, P = εσT⁴
Variables studied Surface finish (emissivity), temperature, distance from the source
Typical sensor Thermopile or radiation sensor with a meter
Supplied radiators, sensor and meter Confirm at enquiry

Care & Handling

  • Use oven gloves or a cloth when filling or moving hot radiators, and stand them on a heat-resistant mat
  • Keep the sensor at the same distance and angle for every comparison, and shield it between readings so it returns to room temperature
  • Avoid touching the finished surfaces, as fingerprints and scratches change their emissivity
  • Keep lamp filaments and hot surfaces away from leads and paper

Why Choose LabEquip

Schools and colleges use this lab to give a quantitative basis to a topic often taught with a single demonstration. It fits well alongside calorimetry practicals such as the Dewar flask calorimeter, and LabEquip can advise on the sensor and meter; contact LabEquip for details or browse more physics lab equipment.

Frequently Asked Questions

Why does a black surface radiate more than a shiny one at the same temperature?

A surface that absorbs radiation well also emits it well. A matt black finish has an emissivity close to 1, while polished metal reflects most radiation and emits only a small fraction of the black-body value.

What does the Stefan-Boltzmann law predict?

The power radiated per unit area is proportional to the fourth power of the absolute temperature. Raising the temperature from 300 K to 600 K therefore increases the radiated power sixteen times.

Why must temperatures be in kelvin?

The law depends on the absolute temperature, measured from absolute zero. Using degrees Celsius would give a wrong power ratio, because zero on that scale is not the point of zero radiation.

How is the radiation measured?

Usually with a thermopile, a group of thermocouple junctions behind a blackened face. The absorbed radiation warms the junctions slightly and produces a small voltage that rises with the incoming power.

Why does the sensor reading drift during measurements?

The sensor itself warms up and also radiates. Shielding it between readings and letting it return to room temperature keeps successive readings comparable.

Does radiation from the room affect the results?

Yes, the sensor also receives radiation from the room and from the experimenter. Taking a reading with the source shielded and subtracting it improves accuracy, especially at low source temperatures.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)