Quick Answer: The tension compression testing machine is a teaching apparatus that stretches or squashes a small specimen while the applied force and the change in length are measured. It is used in materials practicals to plot force against extension and to work out stress, strain and Young’s modulus.
From Load and Extension to Stress and Strain
Force and extension depend on the size of the specimen, so results are converted to quantities that describe the material itself. Stress is the force divided by the original cross-sectional area, measured in pascals; for example, 200 N carried by a cross-section of 1 mm² is a stress of 200 MPa. Strain is the extension divided by the original length and has no unit. In the straight, elastic part of the graph, stress divided by strain gives Young’s modulus.
A ductile metal tested in tension shows a familiar sequence: a straight elastic region, the limit of proportionality, yielding, a long stretch of plastic flow as the material work-hardens, a maximum load at the ultimate tensile strength, then necking and fracture. A brittle material breaks with almost no plastic stage, and many polymers stretch to large strains before failing.
Compression Tells a Different Story
Squashing a specimen is not simply the reverse of stretching it. A short ductile cylinder bulges into a barrel shape and may never fracture, while brittle materials such as chalk or plaster crack along a diagonal plane. Concrete, stone and cast iron are much stronger in compression than in tension, which is why they are used in columns and arches rather than in hanging cables. Comparing the two modes on the tension compression testing machine makes that design rule concrete for students.
For a fair test, measure the original length and cross-section with vernier calipers or a micrometer before loading, align the specimen centrally so it is not bent, and apply the load in steps, recording force and extension at each one. Unloading partway through shows whether the specimen returns to its original length.
Specifications
| Product | Teaching machine for tension and compression tests |
| Test modes | Tension (stretching) and compression (squashing) |
| Quantities found | Stress, strain, Young’s modulus, yield and breaking behaviour |
| Specimens | Small samples of metals, polymers and other materials suited to the grips |
| Force capacity, loading method and specimen size | Confirm at enquiry |
Applications
- Plotting force against extension and converting to a stress-strain curve
- Determining Young’s modulus from the elastic region
- Comparing ductile, brittle and polymer specimens
- Contrasting strength in tension with strength in compression
Care & Handling
- Wear safety glasses; brittle specimens can shatter and stretched samples release energy when they break
- Keep fingers clear of the grips and loading platens while force is applied
- Centre each specimen so the load acts along its axis
- Clean fragments from the grips after each test and keep moving parts lightly oiled
Why Choose LabEquip
Engineering and physics departments teaching properties of materials want one apparatus that shows elastic, plastic and fracture behaviour in front of the class, in both loading directions. Students usually meet stiffness first with springs and a push-pull dynamometer; contact LabEquip to discuss specimens and supply, or browse our physics lab equipment.
Frequently Asked Questions
What is the difference between tension and compression testing?
A tension test pulls the specimen apart along its length, while a compression test pushes its ends together. Many materials behave differently in the two modes; concrete and cast iron, for example, are far stronger when squashed than when stretched.
How is Young’s modulus found from a test?
Plot stress against strain and take the gradient of the straight part at the start of the curve. Stress is force divided by the original cross-sectional area, and strain is extension divided by the original length.
Why does a metal specimen get thinner in one place before it breaks?
That is necking. Once the material passes its ultimate tensile strength, further deformation concentrates in one region, the cross-section shrinks there, and the specimen breaks at the neck even though the recorded force is falling.
How can students tell whether a specimen went past its elastic limit?
Remove the load and measure the length again. If it returns to the original value the deformation was elastic; if it stays longer, the specimen has a permanent set and has deformed plastically.
Is eye protection needed?
Yes. Brittle specimens can fracture suddenly and throw fragments, and a stretched wire or polymer strip stores energy that is released when it breaks, so wear safety glasses and keep hands clear while loading.
What maximum force can the machine apply?
The force capacity is not stated in the listing and can be confirmed at enquiry, together with the specimen sizes the grips accept, so that test pieces can be prepared to suit.
Last Updated: October 2026










Reviews
There are no reviews yet.