Quick Answer: The Table Lamp is a bench-standing electric lamp used in the physics laboratory to light the work area and to act as a light source in optics practicals, for example as a bright object for lens experiments or to illuminate scales. This laboratory table lamp is described here by use; its bulb type and power rating are not stated in the title.
A Lamp on the Optics Bench
Many optics practicals need nothing more than a bright object. With the lamp at one end of the bench, a convex lens and a white screen can be moved until a sharp image of the bulb appears; measuring object and image distances then gives the focal length, and moving the lamp shows how image size and position change. With the lamp across the room, the lens-to-screen distance alone is a fair estimate of the focal length.
A lamp also teaches shadows. A large bulb or shade is an extended source, so an object in front of it casts a fully dark umbra surrounded by a partly lit penumbra; masking the lamp down to a small opening sharpens the shadow. The same arrangement shows why eclipses have total and partial zones. As a rough demonstration of the inverse square law, a light meter can be moved away from a small bare bulb, bearing in mind that the law holds well only when the distance is large compared with the source.
At the reading stage, a lamp angled onto a scale makes vernier lines and cross-wires easier to see, for instance when reading the vernier microscope. A lens from the set of six lenses completes a basic image-formation station.
Applications
- Bright object for image formation and focal length with convex lenses
- Umbra and penumbra with an extended source
- Rough inverse-square-law readings with a light meter
- Lighting scales, verniers and cross-wires during measurement
Care & Handling
- Switch off and let the lamp cool before moving it or touching the shade or bulb.
- Check the cable and plug before each session and do not use a lamp with damaged wiring.
- Keep water and other liquids away from the lamp and its socket.
- Replace the bulb only with the type and rating marked on the lamp.
Specifications
| Type | Table (bench-standing) electric lamp |
| Laboratory role | Bench lighting and light source for optics work |
| Typical pairing | Lenses, screen, optical bench, measuring microscopes |
| Electrical safety | Use only with a sound plug, cable and properly wired socket |
| Bulb type, power rating, supply and adjustability | Confirm at enquiry |
Why Choose LabEquip
Physics teachers often keep a table lamp at each optics station, both as the light source and to brighten scales during readings. LabEquip lists the lamp among its physics lab equipment, and bench sets can be ordered through our contact page.
Frequently Asked Questions
How can a table lamp be used to find the focal length of a convex lens?
Place the lamp at one end of the bench and move the lens and a white screen until a sharp image of the bulb appears. Measure the object and image distances, or, with the lamp far away, take the lens-to-screen distance as an estimate of the focal length.
Why does a large lamp give fuzzy-edged shadows?
Light from different parts of a large bulb or shade reaches the edge of an object at different angles, creating a fully dark umbra surrounded by a partly lit penumbra. A small source gives sharper shadows.
Can the lamp demonstrate the inverse square law?
As a rough demonstration, yes: measure illuminance with a light meter at several distances from a small bare bulb. The law is most accurate when the distance is large compared with the size of the source.
What electrical safety checks are needed?
Inspect the plug and cable before use, keep liquids away, use a properly wired socket and switch off at the wall before changing the bulb. Report any damaged lamp rather than using it.
Why keep filters and plastic items away from the bulb?
Many lamps get hot in use, and plastic filters, polarizing sheets and paper screens can soften, discolour or scorch if they touch or sit very close to the bulb.
Which bulb does the lamp take?
The title does not state the bulb type or rating. Use only the bulb type marked on the lamp, and ask about the fitting when you enquire if you need spares or a particular light colour.
Last Updated: October 2026










Reviews
There are no reviews yet.