Search

In Stock

Study Bench for sound waves

Banc d'étude des ondes sonores, Dual-Microphone Mounting Interface enables the technical Evaluation of phase shifts, interference patterns, and beat frequencies through differential signal acquisition.

Analog and Digital Output Compatibility Économique, Supports the Application of real-time spectral analysis and signal processing protocols, reinforcing evidentiary-grade laboratory reporting.

$74.22

Quick Answer: A sound wave study bench sets up sound in a column of air between a loudspeaker and a reflecting end, with a small microphone that slides along a scale to probe the sound at each point. Students use the sound wave study bench to find the nodes and antinodes of a standing sound wave and, from them, the wavelength and the speed of sound.

Making Standing Sound Waves Measurable

The loudspeaker, fed from a signal generator, sends a sound wave down the air column; the wave reflects from the far end and overlaps the incoming one. At a resonant frequency the two combine into a standing wave whose pressure variation is large at some positions, the pressure antinodes, and almost zero at others, the pressure nodes. The ear cannot pick these out inside a tube, but the microphone can: its signal, shown on an oscilloscope or read by a data logger, rises and falls as it is moved along the scale.

Neighbouring pressure nodes are half a wavelength apart, so measuring the distance across several nodes and dividing gives λ/2 accurately. Multiplying the wavelength by the generator frequency gives the speed of sound, v = fλ, which in room-temperature air should come out at around 340 m/s.

Applications

  • Measuring the speed of sound in air by the standing-wave method
  • Locating pressure nodes and antinodes in an air column
  • Showing that wavelength is inversely proportional to frequency
  • Investigating how reflection at the end of a column shapes the standing wave

Getting Clean Readings

A few habits improve the result. Choose a frequency at which the column resonates strongly, since the pattern is then easiest to read. Move the microphone slowly and approach each minimum from both sides, taking the midpoint, because a node is a broad, shallow dip rather than a sharp point. Keep the generator output modest; driving the loudspeaker hard distorts the signal and adds harmonics that blur the minima.

Repeating the measurement at three or four frequencies and plotting wavelength against 1/f gives a straight line through the origin with gradient v, which averages out reading errors and shows that the speed of sound does not depend on frequency. Where the far end of the column can be opened, comparing open and closed ends shows the node and antinode positions changing places.

Specifications

Product Bench for studying sound waves in an air column
Sound source Loudspeaker driven by an external signal generator
Detector Microphone moved along a scale
Signal read on Oscilloscope or data-logging interface
Measured Node positions, wavelength, speed of sound
Dimensions, supply and accessories Confirm at enquiry

Care & Handling

  • Slide the microphone gently and never force it past the end of its travel
  • Keep the generator output low enough to avoid distorting the loudspeaker
  • Keep the column clean and dry inside, and avoid scratching transparent walls
  • Switch off the generator and any microphone supply before changing connections

Why Choose LabEquip

Physics departments that teach sound quantitatively use the bench at senior-school and first-year college level. LabEquip also offers a Kundt tube with analog outputs for data-logged work on the same topic, alongside other physics lab equipment. Tell us which oscilloscope or interface you have through LabEquip contact.

Frequently Asked Questions

How does the bench measure the speed of sound?

The microphone locates neighbouring nodes of the standing wave, which are half a wavelength apart. The wavelength multiplied by the generator frequency gives the speed of sound.

Why use a microphone instead of listening?

Inside an air column the changes in loudness are too subtle and too close together for the ear to locate reliably. A microphone signal on an oscilloscope shows each minimum and maximum clearly.

What is the difference between a pressure node and a displacement node?

They occur at different places. Where the air particles do not move, the pressure changes most, so a displacement node is a pressure antinode, and the two patterns are shifted by a quarter wavelength.

Which frequency should I start with?

Start in the lower audio range and adjust the generator until the microphone signal is strong, which shows the column is resonating. Record the node positions at that frequency before moving to the next.

Does the speed of sound depend on frequency?

No. In air at a given temperature all audible frequencies travel at the same speed, which is why a graph of wavelength against 1/f is a straight line.

Do I need extra equipment?

Yes. The bench needs a signal generator for the loudspeaker and an oscilloscope, data logger or meter to read the microphone. Tell us what you already have and we will confirm what your set-up still needs.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)