Search

In Stock

Spare belt for a Wimshurst machine

Courroie de rechange pour machine de Wimshurst Fabricated from industrial-grade, UV-stabilized polymers with optimized shore hardness, providing superior grip on drive pulleys to eliminate slippage and resist the corrosive effects of atmospheric ozone generated during spark discharge.

Precision Seamless Cross-Section Features a uniform, circular diameter profile designed to minimize mechanical vibration and lateral wobble, ensuring synchronous timing between counter-rotating induction disks for maximized electrostatic potential difference (V).

$4.79

Quick Answer: The Spare belt for a Wimshurst machine is a replacement drive belt that links the hand-cranked driving pulleys to the disc pulleys of a Wimshurst electrostatic generator. Fitting a fresh Wimshurst machine belt restores firm, slip-free drive, so the two discs counter-rotate at full speed and the generator builds charge normally again.

What the Drive Belts Do

On a Wimshurst generator the crank turns a shaft carrying two driving pulleys, and two belts carry that motion up to pulleys on the disc spindles. One belt runs straight and the other is crossed in a figure of eight, which is what makes the discs spin in opposite directions. Because charge builds only while sectors on the two discs sweep past each other, a slipping or stretched belt shows up as weak, irregular sparking long before it actually breaks.

The belt pictured is a black elastic round belt of the kind used on many school influence machines. Length matters: a belt that is too long slips under load, while one that is too short strains the disc bearings.

Fitting and Checking a Replacement

Note how the old belts run before removing them, especially which one is crossed. Stretch the new belt gently over the driving pulley first, then roll it into the groove of the disc pulley while turning the handle slowly; levering it on with a screwdriver can nick the rubber. Fit the crossed belt so that its two strands do not rub hard against each other where they cross. Finally turn the handle and watch the discs: they must rotate in opposite directions, smoothly, without the belt riding up the pulley flanges.

Specifications

Part Replacement drive belt for a Wimshurst electrostatic generator
Form Elastic round belt, as pictured
Function Transmits crank rotation to the disc pulleys; one belt is fitted crossed so the discs counter-rotate
Length, cross-section and model compatibility Confirm at enquiry

When a Spare Belt Is Needed

  • Replacing a cracked, stretched or broken belt on a school influence machine
  • Keeping a spare in the physics store so a demonstration is not lost to a snapped belt mid-term
  • Restoring an older generator whose original belts have hardened with age

Care & Handling

  • Store spare belts loose and flat in a closed bag, away from sunlight and heat, which harden rubber.
  • Keep oil and grease off the belts and pulley grooves; contaminated belts swell and slip.
  • Ozone produced by sparking slowly ages rubber, so inspect the belts each term on a generator that is used often.
  • Replace both belts together if one has stretched noticeably, so the two discs are driven evenly.

Why Choose LabEquip

Physics departments that already own a Wimshurst machine keep spare belts so a single worn part does not take the generator out of service. LabEquip can help match the belt to your generator; send the make or pulley details through the contact page, or browse related items in the Physics Equipments range.

Frequently Asked Questions

How do I know whether the belt needs replacing?

Look for cracks, shiny flattened sections and slackness on the pulleys. In use, a worn belt shows as discs that slow while the handle still turns, or sparks that become weak and irregular.

Will this belt fit my generator?

Belt length and thickness depend on the pulley spacing and groove size of each machine. Measure the old belt or the distance between pulley centres, and confirm the machine model when you enquire, so the right size is supplied.

Why is one of the two belts crossed?

Crossing a belt into a figure of eight reverses the direction of the pulley it drives. With one belt straight and one crossed, the two discs turn in opposite directions, which the generator needs in order to build up charge.

Can I use a rubber band instead?

A rubber band of the wrong section slips in the groove, stretches quickly and may jump off when the handle is turned briskly. A round drive belt of the correct length keeps steady tension.

Does a new belt need running in?

No. Turn the handle slowly for a few revolutions after fitting to let it seat in the grooves, then check that both discs turn freely and in opposite directions.

How long does a drive belt last?

Life depends on use and storage. Heat, sunlight, oil and ozone from sparking all age rubber, so a clean belt checked each term lasts far longer than one left on a sunny windowsill.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)