Quick Answer: This single stackable banana plug lead is a flexible red connecting lead with a banana-type plug at each end, and each plug has a socket in its rear so another plug can be stacked into it. It is a standard unshrouded lead for wiring low-voltage circuits, meters and power supplies with open sockets.
Unshrouded Versus Safety Leads
On this lead the metal pin of each plug is fully exposed, the traditional design that fits the open sockets and binding posts still found on many meters, rheostats, resistance boxes and older power supplies. It also reaches into narrow socket openings that a shrouded plug cannot enter. The trade-off is that the pin can be touched when the plug is partly in or lying loose, so these leads belong on low-voltage circuits only.
Where equipment has recessed safety sockets, the shrouded stackable safety lead is the matching choice. Many laboratories keep both kinds: standard leads for battery circuits and classic apparatus, safety leads for modern supplies and modules.
Specifications
| Type | Standard unshrouded connecting lead |
| Plugs | Banana-type plug at each end, as pictured |
| Stacking | Rear socket in each plug body |
| Colour in the photograph | Red |
| Quantity | Single lead |
| Length and rating | Confirm at enquiry |
Using the Rear Socket
Each plug body in the product photograph has a socket at its back. Push a second lead’s plug into it and both leads connect to the same terminal, a quick way to branch a circuit or add a voltmeter in parallel without loosening anything. Stacking more than two or three plugs makes a tall column that is easily levered out, so it is neater to branch from a terminal board when many connections meet.
Uses
- Connecting batteries, rheostats, resistance boxes and meters with open sockets
- Branching a circuit at a terminal by stacking plugs
- Adding a voltmeter across a component without breaking the circuit
- General low-voltage wiring in student practicals
Care & Handling
- Use it on low-voltage circuits only, because the plug pins are exposed
- Insert and remove the lead by the plug body, not the cable
- Keep the pins clean and straight so they make good contact
- Coil loosely for storage to avoid kinks near the plugs
Why Choose LabEquip
Single stackable leads are bought to top up lead racks and replace worn leads in school physics labs. LabEquip supplies them with insulated crocodile clips and other physics lab equipment, so a lab can order leads and connectors together.
Frequently Asked Questions
What is the difference between this lead and a safety lead?
This lead has bare, unshrouded plug pins, while a safety lead has an insulating sleeve around each pin. Unshrouded leads fit open sockets but are meant for low-voltage work only.
What is the rear socket for?
It lets another plug be pushed into the back of this one, so two leads can connect to the same terminal at once.
Will it fit recessed safety sockets?
Usually, because the bare pin fits inside the recess. The exposed pin at the other end of the lead still defeats the purpose of safety sockets, so a safety lead is the better match there.
Why stack plugs instead of using a junction?
Stacking is quicker and keeps the circuit compact. For many connections at one point, a terminal board is neater and less likely to be knocked.
Why is the lead red?
Red conventionally marks the positive side of a circuit. Using red and black leads consistently makes circuits easier to check.
How can a poor connection be fixed?
Clean the pin, check that its spring contacts are not flattened and make sure it is pushed fully home. Replace the lead if the cable is damaged near a plug.
Last Updated: October 2026










Reviews
There are no reviews yet.