Search

In Stock

‘s Gravesande’s Ring

Anneau de 'S Gravesande, Standardized Ring-to-Sphere Clearances Supports the Evaluation of thermal coefficients; students can empirically determine the point of expansion-induced occlusion.

Ruggedized Steel Mounting Expérience rapide et visuelle, Ensures hardware longevity during high-frequency heating/cooling cycles, allowing students to apply thermodynamic principles repeatedly without material fatigue.

Insulated Laboratory Handle Adheres to safety protocols for the Application of open-flame heat sources, ensuring students focus on data acquisition rather than safety risks.

$6.15

Quick Answer: ‘s Gravesande’s ring is the classic ball-and-ring apparatus for showing thermal expansion of solids: a metal ball that passes through a metal ring at room temperature no longer passes once it has been heated. It is named after the Dutch physicist Willem ‘s Gravesande, who devised it in the early eighteenth century.

A Demonstration with a History

Willem ‘s Gravesande taught Newtonian physics at Leiden and designed demonstration instruments to make ideas visible to his students. His ring is one of the few still used in almost unchanged form. It consists of a ring and a ball, each usually held on a handle or chain, sized so that the cold ball just slips through the cold ring.

When the ball is heated in a flame it expands in every direction. Its diameter grows by only a fraction of a millimetre, but that is enough to stop it passing through. Left resting on the ring, the ball cools, contracts and eventually drops through, often with a satisfying moment of suspense for the class.

Lesson Uses

  • Introducing thermal expansion of solids in lower secondary physics
  • Challenging the idea that a heated hole shrinks
  • History of science lessons on eighteenth-century demonstration instruments
  • Linking to expansion gaps in rails, bridges and pipelines

Turning the Demonstration Around

The most useful follow-up with ‘s Gravesande’s apparatus is to heat the ring instead. Many students predict that the hole will close up as the metal expands inwards, but the hole gets larger: every dimension of the ring, including its inner diameter, scales up by the same fraction, just as if the ring were a photograph being enlarged. With a hot ring and a cold ball the ball passes through easily, even if the fit was tight before.

Specifications

Item ‘s Gravesande’s ring (ball and ring) for thermal expansion
Principle Expansion of solids on heating
Demonstration Heated ball fails to pass through the ring, then passes after cooling
Heat source Bunsen or spirit burner flame
Metal and dimensions Confirm at enquiry

Care & Handling

  • Grip the parts by their handles alone; the metal stays hot for several minutes
  • Heat the ball evenly by turning it in the flame rather than holding one spot in the hottest part
  • Leave hot parts to cool on a heat-resistant mat, never dropping them onto the bench
  • Wipe off soot and keep the ball and ring free of dents, which would spoil the fit

Why Choose LabEquip

Science teachers choose this ring because a ten-second test convinces a class that solids expand, and the reverse question about the hole drives real discussion. For a set with a quantitative angle see the ring and sphere set, or compare designs with the brass ball and ring apparatus; further physics lab equipment is in the category and LabEquip can advise on class quantities.

Frequently Asked Questions

Who was ‘s Gravesande?

Willem ‘s Gravesande was a Dutch scientist at Leiden University in the early eighteenth century. He promoted Newton’s physics through experiments and designed demonstration apparatus, including this ring.

How much does the ball actually expand?

Only slightly. A typical metal expands by a few hundredths of a millimetre per centimetre of length over a temperature rise of a few hundred degrees, so a heated ball grows by a fraction of a millimetre, enough to jam in a ring that was a close fit.

Why does the ball drop through after a while?

Resting on the ring, the hot ball loses heat to the air and to the ring. It contracts while the ring warms and expands slightly, until the ball is small enough to pass through again.

Does it matter which part is heated?

Yes, and it makes a good prediction exercise. Heating the ball makes it too large for the ring, while heating the ring enlarges its hole, so a cold ball passes through even more easily.

Can the ball be heated on a hot plate?

A flame is quicker and heats the ball all round. A hot plate warms mainly the contact point, so it takes much longer and may not give enough expansion for a clear result.

Is the demonstration suitable for younger students?

Yes, as a teacher demonstration. Students can watch and predict safely, while the teacher handles the flame and the hot ball by its handle and places hot parts on a heat-resistant mat.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)