Search

In Stock

Rods for Thermal Conductivity Study

Tiges pour étude conductivité thermique, Precision-Machined Thermal Contact Points ensure maximum thermal bridge efficiency when integrated with heat sources, supporting high-fidelity Evaluation of heat propagation rates.

Impact-Resistant Alloy Construction Adaptés à la mesure par thermographie infrarouge, Withstands rigorous high-frequency thermal cycling in vocational environments, facilitating the Application of thermodynamics in real-world material testing.

Color-Coded/Stamped Material Identification Simplifies set management in large-scale laboratories, helping students understand the correlation between atomic structure and thermal emissivity.

₹1,320.00

Quick Answer: Rods for thermal conductivity study are a set of rods of different materials, normally made to the same length and diameter, that are heated at one end so that students can compare how far heat travels along each. They are used in the classic wax-melting comparison and with temperature probes for more quantitative work.

The Ingen-Housz Comparison

A classic use of rods for thermal conductivity goes back to Jan Ingenhousz in the eighteenth century. Each rod is coated with a thin layer of wax and one end of every rod is placed in the same hot bath. Heat flows along the rods and the wax melts back from the heated end; after a long time the melted length stops growing.

In that final steady state a neat result holds for rods of equal size and surface: conductivity scales with the square of the melted length, so dividing one squared length by another gives the conductivity ratio. A rod whose wax has melted twice as far as another’s therefore has roughly four times the conductivity. The rule relies on every rod losing heat from its surface in the same way, which is why matched rods are used.

Care & Handling

  • Clean off old wax with warm water and a soft cloth before re-coating
  • Hold the rods only by the cool end, or use tongs, during and after heating
  • Keep the rods straight; a bent rod no longer sits evenly in the hot bath
  • Store the rods dry to prevent tarnish changing their surface

Moving from Wax to Temperature Probes

Wax gives a striking visual comparison, but the same rods can be used with temperature sensors held against them at measured distances from the heated end. Readings taken over time show heat arriving later and rising less at the far end of poorer conductors, and a temperature-distance graph at steady state shows how quickly the temperature falls along each material.

Specifications

Item Set of rods for comparing thermal conduction
Method Heated at one end; comparison by wax melting or temperature readings
Analysis Conductivity ratio from the squared melt lengths at steady state
Level Secondary and college physics practicals
Materials, number of rods and dimensions Confirm at enquiry

Investigations

  • Ingen-Housz wax comparison of conductivities
  • Ranking metals by thermal conductivity in a fair test
  • Recording temperature against distance along each rod
  • Discussing why cooking pans and heat sinks use particular metals

Why Choose LabEquip

Teachers who want a quantitative twist on the conduction lesson choose these rods because the squared-length rule turns a familiar demonstration into a calculation. Where a dedicated wax-bath set-up is preferred, the Ingenhousz apparatus covers the same comparison, and the four metal star gives a quick ranking; see the wider physics lab equipment range or contact LabEquip for the materials in the current set.

Frequently Asked Questions

Why are the melted lengths squared when comparing conductivities?

Along each rod, heat conducted inwards is balanced by heat lost from the surface. Working through that balance shows the temperature falls away along each rod over a characteristic length that grows as the square root of the conductivity, so squaring the length ratio recovers the conductivity ratio.

Must the experiment run until the wax stops melting?

Yes, for the squared-length rule. Early on, the melted lengths reflect how quickly each rod warms, and that depends on its density and specific heat capacity as well as on how well it conducts, so readings should be taken only once the lengths have stopped changing.

What wax should be used?

Ordinary paraffin candle wax works well. Apply a thin, even coat by dipping the rods or brushing on melted wax, because thick or patchy layers melt unevenly and blur the boundary.

Can the rods be heated with a flame?

A container of boiling or very hot water gives every rod the same end temperature and is safer in class. A flame heats the rods unevenly and can overheat the wax, so a hot bath is the more reliable choice.

Why do the rods need the same diameter and surface finish?

Heat leaves each rod through its surface, and the comparison assumes every rod loses heat in the same way. A thicker rod or a shinier surface would change the losses and make the melted length misleading.

Can non-metal rods be compared too?

Yes, glass or wooden rods of the same size show very little melting, which makes the contrast with metals obvious. For poor conductors the wax may hardly melt at all, so a qualitative comparison is more useful than the squared-length calculation.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)