Quick Answer: This is a recycled, two-colour expanded PVC sheet, 3 mm thick and A4 in size: a lightweight, rigid foam board made in two colours, used for model making, signs and engraved labels. Expanded PVC sheet cuts cleanly with a craft knife and is a common material for school technology projects.
What Expanded PVC Is
Expanded PVC is polyvinyl chloride made with tiny closed gas cells through its thickness, which makes it much lighter than solid PVC while keeping a smooth, rigid surface. The cells also make it easy to work: a sharp craft knife scored along a steel rule and snapped gives a straight edge, a coping saw follows curves, and a small CNC router or engraver cuts precise shapes. The board takes paint and adhesive well and does not soak up water the way card or MDF does.
The two colours are what make it useful for engraving. Where the colours are layered, removing the top layer with an engraving cutter exposes the contrasting colour beneath, so lettering, symbols and diagrams stand out without painting. Using recycled material also lets the project include a discussion of plastic waste, recycling codes and material choice.
Safe Cutting: Never by Laser
Expanded PVC must never be cut or engraved with a laser cutter. Heating PVC releases hydrogen chloride gas, which is harmful to breathe and corrodes the optics and metal parts of the machine. For laser projects choose a material the laser maker approves, such as acrylic or plywood, and keep PVC for knife, saw and CNC work with dust extraction.
The same caution applies to hot-wire cutters and heat guns: PVC softens and can be bent gently with moderate heat, but overheating gives off fumes, so any bending should be done carefully in a ventilated room. Cutting with a knife or saw at room temperature produces no fumes.
Specifications
| Material | Expanded (foamed) PVC, recycled (as listed) |
| Colour | Two colours (bicolour) |
| Thickness | 3 mm |
| Size | A4 |
| Cutting methods | Craft knife, saw, CNC router or engraver; not laser |
| Colour combination and pack quantity | Confirm at enquiry |
Project Uses
- Architectural and product models
- Engraved signs, labels and control-panel fronts
- Mounting boards for electronics projects
- Display panels for exhibitions and science fairs
Care & Handling
- Never cut, engrave or burn PVC with a laser cutter or an open flame
- Cut against a steel rule on a cutting mat, keeping fingers behind the blade
- Store sheets flat and away from heat to prevent warping
- Collect offcuts for plastic recycling rather than general waste
Why Choose LabEquip
Technology departments buy two-colour expanded PVC for models and engraved labels cut by hand or by CNC. LabEquip supplies it alongside other physics lab equipment and project materials; ask about colour combinations and quantities via LabEquip contact.
Frequently Asked Questions
Can expanded PVC be laser cut?
No. Heating PVC releases hydrogen chloride gas, which is harmful and damages laser cutters. Cut it with a knife, saw or CNC router instead.
How do I cut a straight edge in 3 mm expanded PVC?
Score firmly along a steel rule with a sharp craft knife, make a second pass, then snap the sheet over the edge of the bench. Smooth any rough edge with fine abrasive paper.
What does two-colour mean for engraving?
The sheet is made in two colours, so engraving or cutting through the surface colour reveals the other. Lettering and symbols then show in contrast without painting.
Which glue works on expanded PVC?
Solvent-based plastic adhesives and many contact adhesives bond it well. Test on an offcut first and work in a ventilated room.
Why is it called expanded PVC?
It is foamed during manufacture, so it contains many small closed cells. That makes it lighter and easier to cut than solid PVC of the same thickness.
Is the sheet suitable for outdoor models?
Expanded PVC does not absorb water, so it copes with damp better than card or wood. Long periods in strong sunlight can fade or warp it, so shade outdoor displays where possible.
Last Updated: October 2026










Reviews
There are no reviews yet.