Search

In Stock

Quincke’s Surface Tension Apparatus

Precision Leveling Base: Features a heavy-duty metallic stand equipped with fine-pitch leveling screws and an integrated spirit level to ensure a perfectly horizontal surface for drop formation.

Optically Ground Glass Plate: Includes a high-grade, chemically resistant glass slab with superior surface flatness, allowing for undistorted observation and measurement of the drop’s meniscus and contact interface.

$7.67

Quick Answer: The Quincke’s Surface Tension Apparatus is used to find the surface tension of mercury, and its angle of contact with glass, from the heights of a large drop resting on a level glass plate. The heights are measured with a spherometer or a travelling microscope.

The Large Drop Method

A small drop of mercury on glass is almost spherical, but a large one flattens under its own weight into a pool with a flat top and rounded edges. Beyond a certain size its height stops increasing, because the weight of liquid at the edge is balanced by surface tension. Georg Quincke used this to measure surface tension: in such a drop the height h from the top surface down to the widest horizontal section depends only on surface tension and density, through T = ρgh²/2.

The total height H, from the top surface down to the glass, also depends on the angle of contact between mercury and glass, so measuring both heights gives the surface tension and the contact angle from one drop. The plate must be truly level, and the heights are taken with a spherometer or a travelling microscope focused in turn on the top of the drop, its widest section and the plate.

Because the method uses mercury, it calls for careful handling, and many schools now use the Jaeger’s apparatus or capillary rise for surface tension, keeping Quincke’s method for advanced practicals where mercury is permitted. The plate, levelling stand and measuring accessories supplied with this listing should be confirmed.

Practicals

  • Determining the surface tension of mercury
  • Finding the angle of contact between mercury and glass
  • Showing that the height of a large drop becomes independent of its width
  • Comparing a non-wetting liquid with water, which spreads on clean glass

Specifications

Method Quincke’s large drop method
Liquid Mercury on a level glass plate, traditionally
Measured Height to the widest section and total height of the drop
Measuring instrument Spherometer or travelling microscope
Parts supplied Confirm at enquiry

Care & Handling

  • Work over a tray in a ventilated room, and wear gloves when handling mercury.
  • Never heat mercury or leave it uncovered.
  • Clean up any spill at once with a mercury spill kit, never with a vacuum cleaner.
  • Level the plate with a spirit level before placing the drop, and keep the plate scrupulously clean.

Why Choose LabEquip

College physics departments buy Quincke’s apparatus for the advanced surface tension practical on mercury and contact angle. LabEquip lists it in Physics Equipments; our contact page can confirm the accessories supplied.

Frequently Asked Questions

Why does Quincke’s method use mercury?

Mercury does not wet glass, so it forms a large, well-defined drop with a clear outline whose heights can be measured. Water spreads on clean glass and does not form such a drop.

Why must the drop be large?

Only in a large, flat-topped drop does the height become independent of the width, so that the simple relation between height and surface tension holds. Small drops are curved all over and need a more complicated analysis.

What heights are measured?

The height from the top of the drop down to its widest horizontal section, which gives the surface tension, and the total height from the top down to the glass plate, which together with the first gives the angle of contact.

What safety precautions are needed with mercury?

Work over a tray in a ventilated room and wear gloves. Never heat mercury. Collect spills at once with a mercury spill kit rather than a vacuum cleaner, and follow your institution’s rules on whether mercury may be used at all.

Why must the glass plate be level?

On a tilted plate the drop runs downhill and becomes lopsided, so its heights no longer match the theory. Level the plate with a spirit level and levelling screws before placing the drop.

Can the method be used with other liquids?

In principle it works for any liquid that forms a large drop with a contact angle well above zero on the chosen surface, such as water on a waxed plate. Mercury on glass remains the classic case.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)