Quick Answer: The quantum eraser option is an add-on for a laser interferometer setup that lets students mark which path the light has taken and then erase that information again. It extends an existing interferometer practical into the quantum eraser experiment on wave-particle duality.
What the Option Adds
An interferometer on its own shows fringes from two overlapping beams. The quantum eraser option supplies the extra elements, usually polarising filters in holders, that turn the setup into a test of complementarity. With polarisers at right angles in the two arms the fringes disappear; with a further polariser placed before the screen they return. Exactly which parts the option contains, and which base interferometer it is designed to fit, should be confirmed before ordering.
Because it is an option rather than a complete set, it is the economical choice for a department that already owns a Mach-Zehnder or similar interferometer and wants to add a modern physics experiment without duplicating the laser, beam splitters and mirrors.
Running the Erasure Sequence
A clear lesson runs in three stages. First, align the interferometer and record the fringes with no polarisers. Second, insert the two arm polarisers at right angles to each other and note that the screen shows a uniform patch: the light now carries which-path information. Third, add the erasing polariser in front of the screen and rotate it. At 45 degrees the fringes reappear; at 0 or 90 degrees only one beam gets through and there are no fringes, because the path is known again.
Turning the eraser slowly through a full rotation and watching the fringe contrast rise and fall shows that the fringes depend on how much path information remains, not on any disturbance to the light inside the interferometer.
Uses
- Extending an existing interferometer practical to cover complementarity
- Showing fringe loss when the two paths are labelled by polarisation
- Investigating fringe contrast as the erasing polariser is rotated
- Linking polarisation optics to quantum measurement in lecture demonstrations
Specifications
| Product | Quantum eraser option (add-on set) |
| Purpose | Marks and then erases which-path information in a two-beam interferometer |
| Usual principle | Polarisation marking of the two interferometer arms |
| Requires | Laser interferometer setup with two separate beam paths |
| Contents and compatible base set | Confirm at enquiry |
Care & Handling
- Handle polarising filters by their mounts; fingerprints on the film are hard to remove
- Keep polarisers away from heat and strong sunlight, which can fade some film types
- Re-check interferometer alignment after inserting each element, as holders can shift the beam slightly
- Return the option parts to their box after use so the filters are not scratched
Why Choose LabEquip
The option suits universities and colleges that already run interferometry and want a modern physics experiment at modest extra cost. For a complete setup built around the delayed-choice question, see the delayed choice quantum eraser practical set; contact LabEquip with the details of the existing interferometer to check the fit.
Frequently Asked Questions
Does the quantum eraser option work on its own?
No. It is an add-on and needs a laser interferometer with two separate arms, such as a Mach-Zehnder arrangement, into which its elements are placed.
Why do the fringes vanish when the arm polarisers are at right angles?
Each beam is then labelled with a different polarisation, so the light reaching the screen carries information about its path. Orthogonally polarised beams cannot interfere, and the pattern becomes a uniform patch.
At what angle should the erasing polariser be set?
At 45 degrees to the two arm polarisers. It then transmits equal components of both beams with the same polarisation, which erases the path information and restores the fringes.
Why are there no fringes when the eraser is at 0 or 90 degrees?
At those angles it transmits light from only one arm and blocks the other, so the path is known again. A single beam on its own cannot produce two-beam interference fringes.
Can the option be fitted to any interferometer?
It needs room in each arm for a polariser and a clear beam before the screen. Holder sizes and mountings differ between systems, so check compatibility with the existing interferometer at enquiry.
Does the experiment prove that photons are particles?
It demonstrates complementarity: interference appears only when the path cannot be known. With a laser the effect is seen with many photons together, so it illustrates the quantum principle with classical light rather than proving it photon by photon.
Last Updated: October 2026










Reviews
There are no reviews yet.