Search

In Stock

Pyrometer

High-Ratio Magnification Pivot: Features a sensitive needle assembly that translates minute longitudinal rod expansion into large-scale angular displacement, allowing for high-resolution measurement of thermal variance across different metallurgical samples.

Stabilized Graduated Scale: The apparatus is equipped with a parallax-resistant, dual-etched arc scale mounted on a heavy-gauge metallic base, ensuring structural stability and repeatable data acquisition during intensive heating cycles.

$5.53

Quick Answer: This Pyrometer is the bar (lever) pyrometer of the school heat laboratory: a metal rod is fixed at one end, heated from below, and the small increase in its length is magnified by a lever pointer moving over a curved scale. Teachers use the bar pyrometer to demonstrate the linear expansion of solids and to compare how much different metals expand.

How the Bar Pyrometer Magnifies Expansion

A metal rod heated through a few tens of degrees grows by only a fraction of a millimetre, far too little to see directly. The pyrometer solves this with a lever. One end of the rod is held firmly against a screw stop, while the free end presses on the short arm of a pivoted pointer. Because the pointer’s long arm may be many times longer than the short arm, a tiny push at the rod end becomes a clearly visible swing at the tip, which travels over a graduated arc.

Heat is applied from beneath, usually with a spirit lamp or a burner flame played along the rod. As the metal warms, the pointer creeps across the scale; when the flame is removed and the rod cools, the pointer drifts back. That reversible movement is the core lesson: solids expand on heating and contract on cooling, and the change is proportional to the length of the rod and to the rise in temperature.

Where the apparatus is used with interchangeable rods, the same heating time gives different deflections for different metals, so a class can rank aluminium, brass, copper and iron by eye before any formula is introduced. The reading is comparative rather than exact, which makes the instrument a natural lead-in to the quantitative linear expansion experiment.

Demonstrations and Lessons

  • Showing that a metal rod expands when heated and contracts again as it cools
  • Comparing the expansion of rods of different metals heated for the same time
  • Explaining expansion gaps in railway lines, bridges and steam pipes
  • Introducing the idea of a coefficient of linear expansion before the quantitative experiment
  • Illustrating how a lever with unequal arms magnifies a small movement

Specifications

Type Bar (lever) pyrometer for demonstrating expansion of solids
Principle Linear expansion of a heated rod, magnified by a pivoted lever pointer
Reading Pointer moving over a graduated arc
Heat source Spirit lamp or burner flame applied beneath the rod
Rods included and heat source supplied Confirm at enquiry

Care & Handling

  • Let the rod and frame cool completely before changing rods or packing the pyrometer away.
  • Keep the flame on the rod, away from the pointer pivot and the printed scale.
  • Wipe off soot after each use so that the rod surface heats evenly next time.
  • Store spare rods flat and straight; a bent rod binds against its supports and gives jerky readings.

Why Choose LabEquip

Secondary-school physics teachers usually buy the bar pyrometer together with other heat-expansion demonstrations, such as the linear expansion apparatus for measured work and the brass ball and ring. LabEquip supplies it as part of its physics lab equipment range, and the rods and heat source required for your lessons can be agreed through the contact page.

Frequently Asked Questions

Is this pyrometer used to measure the temperature of a furnace?

No. Industrial pyrometers measure high temperatures by radiation or with thermocouples. The early instruments called pyrometers measured the expansion of metal bars, and this laboratory pyrometer continues that design: it shows expansion, not temperature.

Why does the pointer move so far when the rod expands so little?

The rod pushes the short arm of a lever and the long arm carries the pointer. The magnification equals the ratio of the two arm lengths, so a movement too small to see at the rod end becomes a large swing at the pointer tip.

Can the bar pyrometer give a value for the coefficient of linear expansion?

Only roughly, because the rod temperature is not measured precisely and the flame heats it unevenly. It is most useful for comparison and demonstration. A steam-jacketed linear expansion apparatus with a thermometer is used when a numerical value is required.

Which metals show the clearest difference on a pyrometer?

Aluminium expands roughly twice as much as iron for the same temperature rise, with brass and copper in between. Heating each rod for the same time with the same flame makes the difference obvious to a class.

How should the rod be heated during the demonstration?

Move the flame slowly along the rod rather than holding it at one spot, so the whole length warms. Note the pointer position before lighting the lamp and again after a fixed time, then remove the flame and watch the return.

Why does the pointer not return exactly to its starting point?

Usually the rod has not cooled fully, or the fixed end has shifted slightly against its stop. Allow more cooling time and check that the clamping screw is firm. Friction at the pointer pivot can also hold the pointer a little short of zero.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)