Search

In Stock

Pyrometer, Superior Pattern

High-Sensitivity Mechanical Magnification: Utilizes a precision-engineered needle assembly that translates microscopic rod elongation into observable angular displacement on a high-visibility, dual-etched quadrant scale.

Heavy-Duty Stabilized Foundation: Features a reinforced, low-vibration cast-iron base with adjustable frictionless pivots, ensuring the apparatus maintains rigid axial alignment during intensive thermal cycles and comparative metallurgical testing.

$5.75

Quick Answer: A superior pattern pyrometer is a bench apparatus for showing the linear expansion of solids: metal bars held between two uprights are heated, and the tiny lengthening of each bar is magnified by a lever pointer moving over a graduated scale. It is used in school heat lessons to compare how much different metals expand for the same heating.

What the Superior Pattern Adds

Every pyrometer of this kind relies on the same idea: one end of a bar is held against a fixed stop, so any growth in length appears entirely at the other end, where it pushes a short lever arm. The superior pattern develops this idea into a comparison instrument. Catalogue versions commonly carry bars of different metals, such as aluminium, brass and iron, mounted side by side between two uprights so that they share the same length and the same heating.

That shared arrangement is what makes the comparison fair. If three bars of equal length receive the same flame for the same time, any difference in their pointer readings comes from the metals themselves, not from the way the experiment was set up. Students typically find aluminium moving furthest and iron least, with brass in between, which matches the order of their expansion coefficients: aluminium expands roughly twice as much as iron for the same temperature rise.

The pointer reading is a magnified, comparative indication rather than a direct length measurement. A teacher who knows the ratio of the lever arms can convert a pointer movement into the actual change in length, which turns the demonstration into a rough estimate of how much a bar grows per degree.

Specifications

Type Lever-pointer pyrometer, superior pattern, for comparing linear expansion
Principle Bar fixed at one end; expansion at the free end turns a pointer over a graduated scale
Typical metals Bars of different metals, for example aluminium, brass and iron
Heating Spirit lamp or burner flame applied beneath the bars
Bars, scale and heat source supplied Confirm at enquiry

Running the Comparison

Before heating, each pointer is set to the start of the scale and the bars are checked to be straight and seated against their stops. A spirit lamp or burner is then moved steadily beneath the bars, or a trough of burning spirit is placed under them where the design allows, so that all the metals warm together. Readings are noted at intervals, and again as the bars cool, to show that the expansion reverses when the heat is removed.

Where It Fits in the Syllabus

  • Comparing the thermal expansion of aluminium, brass and iron under identical heating
  • Introducing the coefficient of linear expansion before a measured experiment
  • Explaining bimetallic strips and thermostats, which depend on two metals expanding by different amounts
  • Showing why steel reinforcement suits concrete, since both expand by similar amounts

Care & Handling

  • Allow the bars and uprights to cool fully before touching the pointers or packing the apparatus.
  • Remove soot from the bars after use so that each metal absorbs heat evenly next time.
  • Check that the pointer pivots move freely; a sticking pivot hides small expansions.
  • Keep the flame on the bars and away from the scale plate and pointer bearings.

Why Choose LabEquip

Science departments that want the expansion lesson to compare metals rather than show a single bar usually choose the superior pattern, while a single-bar pyrometer suits a simpler demonstration. LabEquip lists both in its physics equipment range, and the bar metals and heat source for your order can be agreed through the contact page.

Frequently Asked Questions

How is the superior pattern different from an ordinary bar pyrometer?

An ordinary bar pyrometer usually shows the expansion of one rod at a time. The superior pattern is built for comparison, with bars of different metals heated under the same conditions so their pointer readings can be compared directly.

Why does the aluminium bar move its pointer further than the iron bar?

Aluminium has a larger coefficient of linear expansion than iron, roughly twice as large. For bars of the same length warmed through the same temperature rise, the aluminium bar lengthens more and so pushes its pointer further.

Can the pyrometer give a value for the expansion coefficient?

Only as an estimate. If the lever ratio is known, the pointer movement can be converted into the change in length, but the temperature rise of a flame-heated bar is uncertain. For a measured coefficient, use a linear expansion apparatus with a steam jacket and thermometer.

Why must the bars be the same length?

Expansion is proportional to the original length as well as to the temperature rise. Equal lengths remove one variable, so differences between the pointers can be put down to the metals alone.

What heat source is used with this apparatus?

A spirit lamp or a gas burner moved steadily along the underside of the bars is the usual method. Heating should be even, because a bar heated more strongly at one spot gives a misleading comparison.

Do the pointers return to zero after the experiment?

They should return close to their starting marks as the bars cool, which is itself part of the lesson. If a pointer stays well off its mark, check that the bar is seated against its stop and that the pivot is not binding.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)