Quick Answer: The Proof Plane is a small, flat metal disc fixed to an insulating handle, used to pick up a sample of charge from the surface of a charged conductor and carry it to an electroscope. Because the sample depends on the local charge density, the proof plane lets students compare how charge is spread over a conductor.
How a Small Disc Samples Charge
Laid flat against a charged conductor, the metal disc becomes, for a moment, part of the conductor’s surface and takes on the charge that was sitting on that small area. Lifted away by its insulating handle, it carries that charge with it. The amount collected is roughly the surface charge density at that spot multiplied by the area of the disc, so equal-sized samples from different places can be compared.
The sample is carried to the cap of an electroscope, touched to it, and the leaf divergence is noted. Before the next sample the disc is discharged against an earthed conductor and the electroscope is discharged too, so that each reading starts from zero. Moving steadily, away from clothing and other charged objects, avoids picking up stray charge on the way.
On a pear-shaped conductor, samples from the pointed end give a larger divergence than those from the broad end; inside a hollow conductor, or from the inner surface of Faraday’s butterfly net, the disc collects nothing. These two results, charge crowding at sharp points and charge residing on the outside, are the main reasons the sampler belongs in every electrostatics set.
Where It Is Used
- Comparing surface charge density at the blunt and pointed ends of a pear-shaped conductor
- Showing that no charge can be collected from inside a hollow charged conductor
- Transferring small, repeatable charges to a gold leaf electroscope
- Testing the outer and inner surfaces of a charged net or can
Specifications
| Type | Charge sampler for electrostatics |
| Contact surface | Small flat metal disc |
| Handle | Insulating |
| Function | Carries a charge sample to an electroscope |
| Disc diameter and handle material | Confirm at enquiry |
Care & Handling
- Hold it only by the far end of the handle; the insulation near the disc must stay clean.
- Discharge the disc against an earthed conductor between samples.
- Keep the disc flat and smooth, since a bent or scratched edge loses charge to the air.
- Store it in a dry drawer, apart from the cloths and rods used for charging, so it is not charged by accident.
Why Choose LabEquip
Proof planes are bought with electroscopes and conductors as part of an electrostatics set for senior school and first-year college practicals. LabEquip lists this item in Physics Equipments with the matching apparatus, and the contact page handles orders for complete sets.
Frequently Asked Questions
Why must the disc have an insulating handle?
If the handle conducted, the charge collected by the disc would flow through the hand to earth before it reached the electroscope. Insulation keeps the sample on the disc during the transfer.
How do I make a fair comparison between two points on a conductor?
Touch the disc flat against each point in the same way, transfer the charge to a discharged electroscope and note the divergence. Discharge both the disc and the electroscope between samples and repeat each reading two or three times.
Why does a sample from a sharp point give a bigger reading?
Charge gathers where a conductor’s surface curves most sharply, so the surface charge density there is higher. The same area of disc picks up more charge, and the electroscope leaf rises further.
Why is no charge collected from inside a hollow conductor?
In a conductor at equilibrium, charge resides on the outer surface and the field inside is zero. The inner surface carries no charge, so the disc has nothing to pick up there.
Can it be used on a Van de Graaff dome?
Yes, with care. Touch the dome only when the generator has stopped, because a running dome sparks to the disc. A sample from a well-charged dome can give a large divergence, so start with brief contact.
Is a proof plane the same as an electrophorus?
No. An electrophorus generates charge repeatedly by induction from a charged plate. A proof plane generates nothing; it only samples charge that already exists on a conductor so that it can be detected or compared.
Last Updated: October 2026










Reviews
There are no reviews yet.