Search

In Stock

Pressure Gauge Valve For Compressed Gas 10 Bars Horizontal outlet

Vanne avec manomètre pour gaz comprimé 10 bars Sortie horizontale Features a calibrated 0–10 bar analog dial with high-contrast scaling, allowing for continuous, non-intrusive monitoring of internal vessel pressure during gas-dependent analytical procedures.

Precision Needle-Valve Regulation Engineered with a fine-pitch horizontal orifice control mechanism to provide a stable linear flow coefficient (C_v), enabling the micro-adjustment of discharge rates for sensitive volumetric measurements.

$10.04

Quick Answer: This pressure gauge valve for 10 bar compressed gas, horizontal outlet version, is a brass valve that screws onto a 10 bar gas can and does three jobs: a dial gauge shows the pressure in the can, an orange handwheel controls the flow, and a side outlet carries the gas to the delivery tubing, as pictured. The gauge turns every gas practical into a chance to measure as well as collect.

Reading the Gauge: Boyle’s Law in a Can

For a gas that stays a gas in the can, the absolute pressure is proportional to the amount of gas left as long as the temperature holds steady. A pressure gauge valve therefore doubles as a contents gauge. Most dial gauges read pressure above atmospheric, so about 1 bar is added to the reading before the proportion is applied. Students can log the reading against the volume collected in a measuring cylinder and see a straight-line fall, a direct check of pV = nRT at constant volume and temperature.

The gauge also warns when a can is nearly empty, so a practical is not started with too little gas, and it reveals leaks: a reading that drops while the handwheel is closed points to a fault at the thread or seat.

Specifications

Product Pressure gauge valve for 10 bar compressed-gas cans
Construction in photograph Brass body, dial pressure gauge, orange handwheel, side outlet
Outlet Horizontal, as titled
Gauge use Shows can pressure, and so remaining contents and leaks
Used with 10 bar gas cans and flexible delivery tubing
Gauge scale and can thread Confirm at enquiry

Why a Horizontal Outlet

On the pressure gauge valve the outlet leaves from the side, so the delivery tubing runs at bench height instead of rising from the top of the can. That keeps the tube short and low when the can stands beside a trough or a gas syringe, and it lets the gauge face the user without the tubing crossing in front of the dial.

Fit the valve by hand with the handwheel closed, connect and clip the tubing to the side outlet, then open slowly while watching both the gauge and the apparatus.

Measurements and Practicals

  • Measuring the volume of gas released against the fall in pressure as an ideal gas law practical
  • Supplying gas to a gas syringe or trough through a short, low tubing run
  • Checking a can’s remaining contents before a class practical
  • Spotting slow leaks from a falling reading with the valve closed

Care & Handling

  • Protect the gauge glass from knocks and store the valve in its box when not in use
  • Never connect it to a source above the can pressure it is listed for
  • Keep the thread and seat clean, and close the handwheel before removing the valve
  • Have a gauge checked if it does not return to zero when unpressurised

Why Choose LabEquip

Teachers who want students to measure as well as collect gas choose the gauge version, because the dial makes each gas practical a pressure-and-volume exercise. LabEquip supplies it with compressed gas cans and the simpler compressed gas valve from our physics lab equipment range; contact LabEquip for a combined order.

Frequently Asked Questions

Does the gauge show absolute pressure?

Most dial gauges of this type read pressure above atmospheric, called gauge pressure. Add about 1 bar to the reading to get the absolute pressure used in gas law calculations.

How can the gauge tell me how much gas is left?

For a gas held as a gas in the can, absolute pressure falls in proportion to the amount remaining at steady temperature. Half the starting absolute pressure means roughly half the gas is left.

Why does the reading drop and then recover slightly after a fast flow?

A fast release cools the gas in the can and lowers its pressure. As the can warms back to room temperature the pressure rises a little again, so wait for the reading to settle before recording it.

Why choose a horizontal outlet?

The side outlet keeps delivery tubing low and short when the can stands next to a trough, syringe or reaction vessel, and keeps the tube clear of the gauge face.

How do I find a leak with this valve?

Close the handwheel and watch the gauge for a few minutes. A falling reading means a leak. Brush soapy water over the thread and outlet to see where bubbles form, then remake that joint.

Can the valve be used on a large gas cylinder?

No. It is listed for 10 bar compressed-gas cans. A high-pressure cylinder needs a pressure regulator designed for that gas and cylinder.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)