Quick Answer: The Precision Balance – 600g/1000g – 0.01g is an electronic top-loading balance listed in 600 g and 1000 g capacity versions, both reading to 0.01 g. This 0.01g precision balance is a general-purpose weighing instrument for school and college chemistry, physics and biology practicals.
Where Two Decimal Places Are Enough
Many practical results depend on masses of a few grams to a few hundred grams, read to the nearest hundredth of a gram. At 0.01 g, a 2 g sample is weighed to within half a percent, closer than most other readings in the same experiment, such as a thermometer or burette reading. The balance settles quickly, needs no draft shield and copes with the busy conditions of a teaching laboratory.
The 1000 g version adds headroom for filled beakers, calorimeters with water or larger specimens, while the 600 g version covers most bench chemistry.
Specifications
| Type | Electronic precision balance, top-loading |
| Capacity | 600 g or 1000 g version |
| Readability | 0.01 g (both versions) |
| Typical uses | General chemistry, physics and biology practicals |
| Pan size, power supply and calibration type | Confirm at enquiry |
Empirical Formula of Magnesium Oxide
A standard experiment for this balance is finding the formula of magnesium oxide. Weigh a crucible and lid, add a coil of cleaned magnesium ribbon and weigh again. Heat strongly, lifting the lid briefly now and then to let air in while keeping the white smoke inside, until the metal no longer glows. After cooling, weigh again. The gain in mass is oxygen, and converting the masses of magnesium and oxygen to moles gives a ratio close to 1:1. With about 0.2 g of ribbon the mass gain is a little over 0.1 g, enough for a 0.01 g display to give a class result near that ratio.
Applications
- Empirical formula experiments such as burning magnesium in a crucible
- Weighing reagents for class solutions and samples for practicals
- Masses of water and calorimeters in heat experiments (1000 g version for heavier set-ups)
- Fresh and dry biomass of plant material in biology
Care & Handling
- Let crucibles cool on a heatproof mat before they go on the pan; a hot crucible can damage the pan and reads light.
- Keep the 0.01g precision balance away from the heating area of the bench, out of rising hot air.
- Clean the pan with a damp cloth after salt solutions or plant material, then dry it.
- Check the reading with a known mass at the start of each practical session.
Why Choose LabEquip
School and college science departments usually equip each laboratory with a few balances of this class for group practicals. LabEquip lists this model in its physics lab equipment range together with the Basic 600 g/0.01 g model. Let us know the version and number of balances via the contact page.
Frequently Asked Questions
Why does the magnesium gain mass when it burns?
Burning combines magnesium with oxygen from the air to form magnesium oxide. The oxygen atoms add to the mass, so the white product is heavier than the ribbon, provided little of the smoke escapes.
Why lift the crucible lid during heating?
The lid is lifted briefly to let in air, because the magnesium needs oxygen to burn. Lifting it only a little and only for a moment keeps the white magnesium oxide smoke, which is part of the product, from escaping.
Is 0.01 g readability enough for school chemistry?
For most practicals, yes: reagent masses, reaction yields and empirical formula experiments are limited more by technique than by the second decimal place. Quantitative analysis at college level may need a milligram or analytical balance.
What is the difference between the 600 g and 1000 g versions?
Both read to 0.01 g. The 1000 g version carries heavier loads, such as filled beakers or calorimeters, while 600 g is enough for most bench weighings.
How is dry biomass measured?
Weigh the fresh plant material, dry it in an oven at a moderate temperature until its mass stops falling, and weigh again. Dry mass is a better measure of growth than fresh mass, because water content changes with the time of day and watering.
Why do class results for magnesium oxide often fall below a 1:1 ratio?
Common causes are incomplete burning, so some magnesium remains, and loss of white smoke when the lid is lifted. Magnesium can also react partly with nitrogen in the air, forming magnesium nitride, which changes the mass gained.
Last Updated: October 2026










Reviews
There are no reviews yet.