Search

In Stock

Poulie Magnet Méca

Poulie Magnet-Méca, Low-Friction Ball Bearing Hub Facilitates the technical Evaluation of mechanical efficiency and tension parity, reinforcing evidentiary-grade laboratory reporting.

Frottements négligeables, Ensures the reliable Application of multi-filament cordage in complex pulley systems, minimizing parasitic slippage during high-cadence undergraduate trials.

$6.15

Quick Answer: A magnetic pulley is a low-friction pulley wheel mounted on a magnetic base, so it can be placed anywhere on a vertical steel board. The magnetic pulley redirects a string carrying a hanging mass, turning a vertical weight into a force in any chosen direction for statics experiments.

Changing Direction, Not Size

A string running over a magnetic pulley pulls with the same tension on both sides, as long as the wheel turns freely. A 200 g mass hanging from one end therefore produces a pull of about 1.96 N along the other part of the string, in whatever direction the pulley position sets. Several such pulleys on one board let students apply known forces at chosen angles.

Friction in the pulley breaks that rule slightly, so it is worth testing. Set up a balanced arrangement, nudge the knot or plate a little and let go: if it returns to the same position each time, friction is small enough to ignore.

A Force Table on the Wall

Tie three strings to a small ring, run each over its own pulley to a hanging mass and let the ring settle. This is a vertical version of the horizontal force table. The ring comes to rest where the three tensions balance, and the angles between the strings can be drawn directly on the board or on paper fixed behind them.

Resolving each tension into horizontal and vertical components, with the angles measured from the board, shows that both sets of components add to zero. Moving one pulley and watching the ring find a new balance point makes the vector idea concrete.

Board Experiments

  • Building a vertical force table with three or more hanging masses
  • Applying known forces to a light plate in three-force equilibrium work
  • Redirecting forces onto a moments disc or lever
  • Showing that string tension is the same on both sides of a free pulley

Specifications

Product Pulley on a magnetic base for mechanics boards
Mounting Magnetic, on vertical steel boards or panels
Function Redirects a string tension without changing its size
Used with Strings, hanging masses, force meters, light plates
Wheel diameter and holding force Confirm at enquiry

Care & Handling

  • Keep the magnet face clean and slide it into place rather than snapping it onto the board
  • Check the wheel spins freely and the string sits in the groove before loading
  • Keep hanging loads moderate and well clear of feet and the bench edge
  • Store away from compasses, magnetic cards and loose steel parts

Why Choose LabEquip

Teachers who run statics on a vertical board buy these pulleys in threes and fours, since most force experiments need several at once. LabEquip supplies them with the light plate for three-force equilibrium and other physics lab equipment for board-based mechanics; contact LabEquip to plan a full board set.

Frequently Asked Questions

Does a pulley change the size of the force in the string?

No. A free-running pulley changes only the direction. The tension on both sides is the same, so the pull equals the weight of the hanging mass.

How can friction in the pulley be checked?

Set up a balanced arrangement, displace it slightly and release. If it returns to the same position each time, friction is negligible; if it stops in different places, the pulley is sticking.

How do I make a force table on a vertical board?

Tie three strings to a light ring, run each over its own magnetic pulley to a hanging mass and let the ring settle. Then record the angles and the weights.

Will the magnet slip under load?

Grip is strongest on clean, bare steel and falls on painted, thin or dusty surfaces, so test it with the planned load first. The holding force for this pulley can be confirmed at enquiry.

How are the angles between strings measured?

Draw along each string on the board or on paper fixed behind it, extend the lines to the ring and measure the angles with a protractor.

Can the pulley be used in moments experiments?

Yes. It lets a force from a hanging mass act on a moments disc or lever at any angle, so students can test how the lever arm depends on the direction of the force.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)