Search

In Stock

Portable Xenon Stroboscope with Sync Input

Stroboscope portatif xénon à entrée synchro, High-Intensity Xenon Discharge Enables the technical Evaluation of high-speed mechanical deformation and periodic oscillatory patterns in fluid dynamics and structural engineering research.

Entrée synchro idéale pour les phénomènes stationnaires. Supports accurate student Application of frequency measurement principles for rotating machinery, minimizing measurement uncertainty without physical contact.

Lightweight Portable Architecture Ensures laboratory Consistency across varied experimental setups, allowing students to conduct field-based mechanical audits in vocational environments.

₹1,120.00

Quick Answer: A portable xenon stroboscope is a flashing light source that uses a xenon flash tube to give very short, bright bursts of light at a controlled rate. The sync input lets an external signal fire each flash, so the xenon stroboscope can stay locked to a machine, a vibrating object or a sensor-detected event instead of running only from its own rate setting.

Why Xenon and Why a Sync Input

In a xenon flash tube a charged capacitor discharges through the gas, producing an intense white flash that lasts only a tiny fraction of a second. Because each flash is so short and so bright, a fast-moving object is caught almost without blur, even in a room that is not fully dark. That makes a xenon unit the usual choice for large demonstrations in a lecture room and for lighting machinery at a distance.

When the stroboscope runs from its own internal timing, the flash rate must be adjusted by hand to match the motion, and any drift in the machine’s speed makes the frozen image creep. A sync input removes that problem. A signal taken from the source of the motion, such as a function generator driving a vibrator, an optical pick-up on a shaft or a sensor that detects a falling drop, fires each flash at the right moment, so the image stays still even when the speed wanders.

Slow Motion From a Small Offset

A stroboscope can also make fast motion look slow. If a fan turns 50 times a second and the flashes come 49 times a second, the blade has moved a little further round at each flash, and it appears to turn once a second. The apparent frequency equals the difference between the motion frequency and the flash frequency. Flashing slightly faster than the motion makes the blade appear to turn backwards, the same effect seen with wagon wheels in films.

Specifications

Lamp Xenon flash tube
Flash timing Internal rate setting or external sync input
Form Portable unit
Typical subjects Rotating shafts and fans, vibrating strings and blades, falling drops
Flash-rate range, sync signal level and power source Confirm at enquiry

Applications

  • Freezing a vibrating string driven by a signal generator, with the generator’s signal fed to the sync input
  • Lighting a rotating fan or motor shaft for large-group demonstrations
  • Catching drops falling from a nozzle, timed by a drop sensor
  • Showing slow and reversed apparent motion by offsetting the flash rate

Care & Handling

  • Never open the housing: the flash circuit stores a high voltage in its capacitor, and the tube should be replaced only by a qualified technician.
  • Allow the unit to rest between long runs at high flash rates so the tube and circuit do not overheat.
  • Connect or remove the sync lead with the stroboscope switched off.
  • Carry it in its case and keep the reflector window clean and scratch-free.

Why Choose LabEquip

Lecture-room demonstrations and engineering workshops tend to need the brightness of a xenon tube, and the sync input matters to anyone driving experiments from a signal generator or sensor. LabEquip lists this unit in its physics lab equipment range next to an LED stroboscope suited to smaller groups. Ask through the contact page about the sync signal your apparatus produces.

Frequently Asked Questions

What is the sync input used for?

It lets an external signal fire the flashes. Feeding in the signal that drives or detects the motion keeps every flash at the same point in the cycle, so the image stays frozen even if the speed drifts.

How is a xenon stroboscope different from an LED stroboscope?

A xenon tube gives a brighter, whiter and shorter flash, which suits large rooms and fast subjects. LED units run cooler and draw less power but give less light per flash, so they suit small groups in a dimmed room.

Why can a fan look still at more than one flash rate?

If the flashes come at half or a third of the turning rate, the blade completes two or three turns between flashes and is still caught in the same place. The highest flash rate that gives a single still image equals the true turning rate.

How is slow-motion viewing produced?

Set the flash rate slightly below the rate of the motion. The object advances a little between flashes and appears to move slowly at a rate equal to the difference between the two frequencies.

Can the flash tube be replaced by the user?

No. The capacitor inside can hold a dangerous charge after the unit is switched off, so the housing should be opened only by a qualified technician.

What precautions apply to flashing light in class?

Flashing light at certain rates can trigger seizures in people with photosensitive epilepsy. Ask the class beforehand, keep sessions short, avoid aiming the flashes at faces and stop at once if anyone feels unwell.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)