Quick Answer: These platinum electrodes are two fine platinum wires passing through a white stopper, as pictured, so the pair can be fitted into a tube or cell with the stopper closing it. Platinum electrodes do not react with the electrolyte or with the gases formed on them, so they are chosen when the electrodes must stay unchanged.
What Platinum Wire Offers
Platinum is one of the least reactive metals. It is not attacked by dilute acids, alkalis or the oxygen formed at an anode, so it neither dissolves into the solution nor builds up an oxide layer that would raise the resistance. Its surface also helps hydrogen and oxygen form readily, so bubbles appear at a lower voltage than on many other materials.
Using fine wire keeps the amount of this scarce precious metal small while still giving enough surface for a school-scale experiment. The stopper holds the two wires apart at a fixed spacing and makes the pair easy to fit and remove as one unit.
When to Choose Platinum Over Graphite or Nickel
Graphite is the everyday inert electrode, but it slowly oxidises where oxygen is released and can shed fine particles. Nickel suits alkaline electrolytes but corrodes in acid. Platinum works across acidic, neutral and alkaline solutions, which is why it is used for gas-volume work, for electrolysing dilute acids, and for experiments where any trace of dissolved electrode metal would spoil the result.
Specifications
| Product | Pair of platinum wire electrodes |
| Shown in photograph | Two fine platinum wires through a white stopper |
| Electrode metal | Platinum, as titled |
| Suits | Acidic, neutral and alkaline electrolytes |
| Power | Low-voltage DC laboratory supply |
| Wire length and stopper size | Confirm at enquiry |
Experiments
- Electrolysing dilute sulfuric acid to collect hydrogen and oxygen
- Electrolysing copper(II) sulfate with inert electrodes to show oxygen at the anode
- Comparing the products at inert and reactive electrodes in the same solution
- Demonstrating electrolysis in a stoppered tube where gases must be kept separate
Care & Handling
- Rinse the wires with distilled water after every use
- Do not bend the wires repeatedly; fine platinum wire work-hardens and can break
- Never touch the wires with other metals in solution, as deposits are hard to remove
- Store the stopper upright in a box so the wires are protected
Why Choose LabEquip
Schools and colleges keep a pair of platinum electrodes for the experiments where graphite or other metals would interfere. LabEquip supplies them with the nickel electrodes in a stopper, the platinum electrode electrolyzer and other physics lab equipment; contact LabEquip for stopper sizes.
Frequently Asked Questions
Why is platinum called an inert electrode?
It does not react with the electrolyte or with the products at its surface, so it carries the current without being used up or changing the solution.
Why are the electrodes wires rather than plates?
Platinum is a scarce precious metal, so a fine wire gives enough surface for school experiments while using very little of it.
Can platinum wire be used in alkaline solutions?
Yes. Platinum is not attacked by dilute acids or alkalis, so it can be used across the usual range of school electrolytes.
What forms on platinum wires in copper(II) sulfate?
Copper deposits on the cathode and oxygen bubbles form at the anode. With copper electrodes instead, the anode would dissolve rather than give oxygen.
How should the wires be cleaned?
Rinse with distilled water. A copper deposit can be removed by reversing the current briefly in clean dilute acid under supervision, rather than by scraping.
Why should the wires not be bent repeatedly?
Fine wire hardens and weakens each time it is bent, and a platinum wire that snaps at the stopper is difficult to repair.
Last Updated: October 2026










Reviews
There are no reviews yet.