Quick Answer: The Peltier module heat pump is a thermoelectric teaching apparatus in which a direct current through a Peltier module moves heat from one face to the other, cooling one side while warming the other. It is used to study the Peltier effect, to measure the coefficient of performance of a heat pump and, run in reverse, to show the Seebeck effect.
Pumping Heat with an Electric Current
A Peltier module is a flat array of small semiconductor blocks, alternately n-type and p-type, connected electrically in series and thermally in parallel between two ceramic plates. When a direct current flows, the charge carriers transport heat in the direction of their flow, so one plate absorbs heat and the other releases it. Reversing the current reverses which face cools and which warms.
Unlike a compressor heat pump, the module has no moving parts and no refrigerant. Its weakness is that the semiconductor also conducts heat back from the hot side to the cold side and dissipates electrical power as Joule heating, so the temperature difference it can hold is limited and the heat sinks or reservoirs attached to it matter a great deal.
Specifications
| Item | Thermoelectric heat pump based on a Peltier module |
| Principle | Peltier effect: heat carried by a direct current |
| Reverse use | Seebeck effect, with the module acting as a thermogenerator |
| Measurements | Coefficient of performance from heat moved and electrical energy supplied |
| Supply, reservoirs and sensors | Confirm at enquiry |
Measurements Students Can Make
Placing water reservoirs or metal blocks of known heat capacity on each side lets students measure how fast the cold side loses heat and the hot side gains it. Dividing the heat removed from the cold side by the electrical energy supplied gives the coefficient of performance for cooling; the heat delivered to the warm side divided by the same input gives the heating figure, which is larger by one. Repeating the measurement as the sides drift apart shows the coefficient falling as the temperature difference grows.
Disconnecting the supply and connecting a voltmeter turns the Peltier module heat pump into a thermogenerator: with one side warm and the other cool it produces a voltage, the Seebeck effect, closing the loop between the two thermoelectric effects.
Care & Handling
- Never run the module without its heat sink or reservoirs in place, as the hot side can overheat quickly
- Use only the supply recommended for the apparatus and keep the current within its rating
- Keep water away from electrical connections when using reservoirs
- Let both sides return towards room temperature before reversing the current
Applications
- Measuring the coefficient of performance of a heat pump
- Demonstrating heating and cooling from one device by reversing the current
- Comparing the Peltier and Seebeck effects
- Discussing solid-state cooling in electronics and portable coolers
Why Choose LabEquip
University and senior school laboratories choose this apparatus because one set covers heat pumps, thermoelectric effects and energy efficiency. For the generator side of the topic see the semiconductor thermogenerator experiment, for a compressor comparison the demonstration heat pump, and for the full range our physics lab equipment; contact LabEquip for supply details.
Frequently Asked Questions
What is the difference between the Peltier and Seebeck effects?
In the Peltier effect a current driven through junctions of two different conductors carries heat with it, cooling one side and warming the other. The Seebeck effect is the reverse: a temperature difference across the junctions produces a voltage.
Why must the hot side be cooled?
The module moves heat to the hot side and also releases its own electrical power there. If that heat is not removed, the hot side warms, heat leaks back through the semiconductor and the cold side warms too, until the module stops cooling and may be damaged.
Why can the coefficient of performance be greater than one?
A heat pump moves heat rather than creating it. The electrical energy only drives the transfer, so the heat delivered can exceed the energy supplied without breaking conservation of energy.
Why does the performance fall as the temperature difference grows?
Heat conducted back through the module increases with the temperature difference, and more current is needed to overcome it, which adds Joule heating. Both effects reduce the net heat pumped per unit of electrical energy.
Can the current be reversed?
Yes. Reversing the polarity swaps the cold and hot faces, which is a quick way to show that the effect depends on the direction of the current. Let the faces settle near room temperature first to avoid a sudden large temperature change.
Where are Peltier modules used outside the classroom?
They cool camera sensors, laser diodes and some electronics, and they are used in small portable coolers and laboratory temperature-control stages where silent, compact operation matters more than efficiency.
Last Updated: October 2026










Reviews
There are no reviews yet.