Search

In Stock

Neodymium Cylinders

High-Grade Sintered NdFeB Composition: Engineered from premium N-grade neodymium-iron-boron, these cylinders exhibit an exceptional Maximum Energy Product (BHmax), providing superior magnetic remanence and coercive force for precision-driven laboratory applications.

Industrial Ni-Cu-Ni Protective Coating: Features a multi-layered galvanic finish that prevents structural oxidation and corrosion, ensuring long-term surface integrity and stable magnetic performance in demanding institutional research environments.

$2.14

Quick Answer: Neodymium Cylinders are rod-shaped neodymium-iron-boron magnets, usually magnetised along their length so that the poles are at the two flat ends. Neodymium cylinder magnets are the standard choice for dropping through a copper tube to demonstrate Lenz’s law and for moving through a coil to induce a current.

Lenz’s Law in a Copper Tube

Drop a neodymium cylinder through a vertical copper or thick aluminium tube and it takes far longer to emerge than it would to fall the same height in air. As the magnet falls, the changing field through each section of the tube induces circulating eddy currents in the metal. By Lenz’s law these currents produce a field that opposes the change causing them, so they push up on the magnet and slow it to a steady speed.

Dropping an identical non-magnetic rod, or the same magnet through a plastic tube, shows the contrast. Cutting a slit along a second tube shows that the effect almost vanishes when the eddy currents cannot circulate. The cylinder’s shape lets it fall through a tube only slightly wider than itself, which gives the strongest effect.

Induction Experiments

  • Demonstrating Lenz’s law by dropping the magnet through a copper or aluminium tube
  • Inducing currents in a coil to illustrate Faraday’s law
  • Recording induced e.m.f. pulses with a coil and data logger as the magnet falls
  • Modelling a shake-powered torch generator

Moving a Magnet Through a Coil

A neodymium cylinder pushed into a coil connected to a sensitive galvanometer gives a large deflection, and pulling it out gives a deflection the other way. Because the field is so strong, even a coil of few turns gives a clear reading, which makes Faraday’s law easy to show. Dropping the magnet through a coil connected to a data logger records a pair of opposite pulses, the second larger because the magnet is moving faster as it leaves.

Sliding a cylinder back and forth inside a tube wound with a coil is also the principle of the shake-powered torch, a useful link to everyday technology.

Specifications

Type Cylinder (rod) permanent magnets
Material Neodymium-iron-boron (NdFeB), usually plated
Poles Usually at the two flat ends (magnetised along the length)
Main use Eddy-current and electromagnetic induction demonstrations
Diameter, length, grade and coating Confirm at enquiry

Care & Handling

  • Never let cylinders snap together end to end; they chip and can trap fingers.
  • Use a soft landing pad, such as foam, under tubes and coils so the magnet does not hit the floor.
  • Keep them away from young children, pacemakers, bank cards and electronic devices.
  • Keep them away from heat, which permanently weakens neodymium magnets.

Why Choose LabEquip

Physics departments buy neodymium cylinders mainly for induction and Lenz’s law demonstrations, often together with the electromagnetic induction apparatus. LabEquip lists these magnets in its physics equipment category; for the diameter to match an existing tube, ask through the contact page.

Frequently Asked Questions

Why does a neodymium cylinder fall slowly through a copper tube?

Its moving field induces eddy currents in the copper. By Lenz’s law, these currents create a field that opposes the motion of the magnet, so it falls at a slow, steady speed instead of accelerating freely.

Does the tube have to be copper?

Any good electrical conductor works, and copper and thick-walled aluminium give the strongest effect. The tube must not be magnetic, so steel tubes are unsuitable, and plastic tubes show no braking at all.

What size of tube should be used with the cylinder?

The inside of the tube should be only slightly wider than the magnet, so that the metal is close to the moving field. A loose fit weakens the braking effect a great deal.

Where are the poles on a neodymium cylinder?

Usually at the two flat ends, because the cylinders are magnetised along their length. Check with a compass; diametrically magnetised cylinders, with poles on the curved sides, are also made but are less common.

How can the cylinder show Faraday’s law?

Connect a coil to a sensitive galvanometer and push the magnet in and out. The faster the movement and the more turns in the coil, the larger the deflection, which shows that the induced e.m.f. depends on the rate of change of flux.

What precautions are needed with neodymium cylinders?

Stop them snapping together, keep them away from young children and from pacemakers and electronics, avoid heating them, and catch them on a soft pad after drops through tubes.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)