Search

In Stock

Moving Coil Meter, Round Dial, Top Terminal (Ammeters, Milli-Ammeters, Micro-Ammeters, Voltmeters and Galvanometer)

High-Stability PMMC Mechanism: Engineered with a permanent magnet moving coil system and sapphire jewel bearings to minimize mechanical friction, ensuring a linear scale response with ±2.0% full-scale accuracy across all DC ranges.

Ergonomic Top-Terminal Architecture: Features 4mm shrouded safety sockets or heavy-duty binding posts mounted on the upper chassis, optimized for high-density laboratory setups where vertical lead access reduces clutter and prevents accidental disconnection.

$9.02

Quick Answer: A top terminal moving coil meter is a round-dial DC meter whose connecting terminals are mounted on top of the case rather than on its face. It is offered as an ammeter, milliammeter, microammeter, voltmeter or galvanometer for school and college electricity practicals.

Why Put the Terminals on Top

With the terminals on the top of the case, connecting leads drop down from above and never cross the dial. The scale stays unobstructed while students add or change connections, and the leads are less likely to be caught by a hand reaching for the pointer’s zero adjuster. Some teachers prefer this layout when several meters stand in a row behind a circuit board, because the wiring runs neatly over the top.

Electrically the meter is the same as any permanent-magnet moving-coil instrument: the deflection is proportional to the current through the coil, and shunts or series resistances inside the case set each version’s range.

The Galvanometer Version and Current Direction

The galvanometer in this family is commonly a centre-zero type, so the pointer can swing either way. That makes it the natural detector for electromagnetic induction: when a magnet is pushed into a coil connected to it, the pointer swings one way, and when the magnet is pulled out, it swings the other. In bridge and potentiometer work the same centre-zero scale shows at once which side of the balance point the jockey is on.

The meter responds only to direct current. On alternating current the coil’s torque reverses many times a second and averages to zero, so the pointer barely moves. This is worth showing to a class with a low-voltage AC supply, because it explains why AC meters use a different principle or a rectifier.

Specifications

Type Moving-coil meter for direct current
Dial Round
Terminals Mounted on top of the case, polarity marked
Versions Ammeter, milliammeter, microammeter, voltmeter and galvanometer
Range and zero position of each version Confirm at enquiry

Applications

  • Showing induced currents with a coil and bar magnet
  • Finding the balance point on a meter bridge or potentiometer
  • Measuring current and voltage in student DC circuits
  • Checking the polarity of cells and power supply outputs

Care & Handling

  • Protect the galvanometer with a series resistance until a circuit is close to balance.
  • Keep leads from pulling sideways on the top terminals, which can loosen them over time.
  • Use only on DC circuits within the range of the version in use.
  • Store the meters upright or flat in a dry cupboard, away from magnets.

Why Choose LabEquip

Physics departments choose the top terminal moving coil meter where tidy bench wiring matters, often alongside a meter bridge for the galvanometer version. LabEquip lists it in its physics lab equipment, and the versions and ranges you need can be arranged through our contact page.

Frequently Asked Questions

What is the advantage of terminals on the top of the case?

Leads connect from above and do not hang across the dial, so the scale stays clear and connections are easy to change while students watch the pointer.

Is the galvanometer a centre-zero meter?

The galvanometer in this family is commonly centre-zero, which lets it show current in either direction. The zero position of the version you order can be confirmed when ordering.

Why does the meter not respond to alternating current?

The coil’s torque reverses each time the current reverses. On AC the reversals are too rapid for the movement to follow, the average torque is zero, and the pointer stays near zero.

How do I protect the galvanometer in a bridge experiment?

Put a high resistance or a shunt in the galvanometer branch while searching for the balance point, then remove it for the final, sensitive adjustment near balance.

Can I use this meter for an electromagnetic induction experiment?

Yes, the galvanometer version is suited to it. Connect it to a coil and move a magnet in and out; the pointer shows the induced current and its direction.

Are the top and front terminal meters interchangeable in a practical?

Electrically, yes, for the same version and range. The difference is the position of the terminals, which affects how the leads are routed on the bench.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)