Search

In Stock

Motorization for Rotation Study Bench

Motorisation pour banc d'étude de la rotation, Integrated Tachometer Output Enables precise Analysis of rotational frequency and period, providing the high-fidelity empirical data required for evidentiary-grade undergraduate research.

High-Tension Belt Drive Interface supports the stable Application of constant torque for prolonged circular motion trials, ensuring experimental repeatability across multiple workgroups.

Ruggedized Vibration-Damping Base Ensures laboratory Consistency by minimizing parasitic mechanical noise during high-RPM operations, reinforcing measurement accuracy.

₹3,250.00

Quick Answer: This motor drive for rotation study bench experiments is the drive unit that turns the bench’s rotating part at a steady angular speed. It replaces turning by hand, so that centripetal force, angular speed and radius can be measured while the speed stays constant.

Why a Steady Speed Matters

Circular-motion experiments test the relation F = mω²r. Because the force depends on the square of the angular speed, a 5 % wobble in speed produces about a 10 % wobble in the force. Turning a bench by hand makes the speed rise and fall with every push, so a force gauge or the position of a sliding mass will not settle. A motor holds the speed steady for as long as the reading takes.

With the speed under control, the experiment becomes a proper investigation. Hold ω fixed and change the radius to show that F is proportional to r; hold r fixed and change the speed to show that F is proportional to ω², so that doubling the speed makes the required force four times larger.

Specifications

Item Motor drive (motorisation unit) for a rotation study bench
Function Turns the bench’s rotating part at a steady angular speed
Speed check Stopwatch over several turns, stroboscope or tachometer
Relation tested F = mω²r
Compatible bench, supply and speed range Confirm at enquiry

Checking the Speed

Whatever the setting on the drive, measure the speed independently. The simplest method is to time ten turns with a stopwatch and repeat; the period is the time divided by ten, and ω = 2π/T. A stroboscope tuned until a mark on the bench appears to stand still gives the rate directly, and a tachometer reads it in revolutions per minute, which converts to angular speed with ω = 2π × rpm ÷ 60. At 60 revolutions per minute, for example, ω is 6.28 rad/s.

Applications

  • Verifying that centripetal force is proportional to radius at constant angular speed
  • Showing that the required force rises with the square of the angular speed
  • Running uniform circular motion for stroboscope and video measurements
  • Repeating readings at the same speed so results can be averaged

Care & Handling

  • Start at the lowest speed and raise it gradually, with every mass on the bench secured.
  • Switch off and wait for the bench to stop completely before adjusting masses, sensors or the drive coupling.
  • Keep the power lead clear of the turning parts and away from water.
  • Keep fingers, hair and loose clothing away from the coupling and the rotating arm.

Why Choose LabEquip

Physics departments that already own a rotation study bench add this drive when they want measurements at a constant speed rather than a hand-turned demonstration. LabEquip lists it in its physics lab equipment range with a rotating platform and the centripetal force demonstration kit. Please send the model of your bench through the contact page so the drive can be matched to it.

Frequently Asked Questions

Why does a centripetal force experiment need a constant speed?

The force depends on the square of the angular speed, so small changes in speed give twice as large a change in force. A steady speed lets the force reading settle and makes repeated readings comparable.

How can I check that the speed is steady?

Time ten turns several times in a row; the results should agree closely. Alternatively, tune a stroboscope until a mark on the bench appears frozen and watch whether it stays still.

How do I convert revolutions per minute into angular speed?

Multiply by 2π and divide by 60. A bench turning at 60 revolutions per minute has an angular speed of 6.28 radians per second.

Which relationship can be tested with the motor drive?

The centripetal force law F = mω²r. Keeping the speed fixed and varying the radius gives a straight-line graph of F against r, and varying the speed at fixed radius gives a straight line of F against ω².

Can the drive be fitted to a different bench?

It is intended for the rotation study bench it is listed for. Couplings, mountings and speeds differ between makes, so fitting it to another bench should be checked first.

What precautions apply when the bench is motor-driven?

Secure every mass, start slowly, keep hands and hair clear of moving parts and stop the drive fully before making any adjustment. Never leave a running bench unattended in class.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)