Quick Answer: The Mirror Strip for Laboratory is a narrow, flat plane mirror used upright on a drawing board in physics practicals to study reflection. With a mirror strip and a few pins, students verify the laws of reflection and show that the image in a plane mirror lies as far behind the mirror as the object is in front.
Plane Mirror Practicals with a Strip
A strip is the most practical shape of mirror for ray tracing. It can be stood vertically along a pencil line on paper, held by a small block or a lump of plasticine, and its narrow width leaves plenty of paper in front for drawing incident and reflected rays. Pins pushed upright in front of the mirror act as objects, and their images are located by sighting along lines of pins.
For the laws of reflection, two pins mark an incident ray at a measured angle to the normal; two more are placed in line with the images of the first two. Joining them gives the reflected ray, and the angle of reflection is found equal to the angle of incidence, with incident ray, reflected ray and normal all in the plane of the paper. For image position, a single object pin is viewed from several directions; the reflected rays, traced back, meet behind the mirror at the image, which lies on the normal through the object at the same distance behind the mirror.
Many glass mirrors are silvered on the back surface, behind a layer of glass, which produces a faint second image from the front surface. Drawing the mirror line along the silvered back, not the front face, gives more accurate results. A strip of this kind fixed behind a pointer or scale also removes parallax: the reading is taken when the pointer hides its own image.
Practicals and Projects
- Verifying the laws of reflection by ray tracing with pins
- Locating the image in a plane mirror and comparing object and image distances
- Studying the multiple images formed by two strips set at an angle
- Eliminating parallax error when reading a pointer against a scale
- Building a simple periscope or kaleidoscope
Specifications
| Type | Plane mirror, strip form |
| Use position | Upright on paper or a drawing board |
| Image formed | Virtual, upright, same size, laterally inverted |
| Practical method | Pin ray tracing and no-parallax location |
| Length, width and holder | Confirm at enquiry |
Care & Handling
- Handle the strip by its long edges; cut glass edges can be sharp unless ground or bound.
- Protect the coated back from scratches, because a damaged coating leaves gaps in the reflection.
- Clean the front with a damp cloth and dry it at once; water creeping behind the coating tarnishes it.
- Collect strips in a slotted box after the practical so that they are not stacked face to face.
Why Choose LabEquip
Mirror strips are bought in class quantities, because every student or pair needs one for the reflection practical in secondary physics. LabEquip lists them in Physics Equipments along with apparatus such as the angle between two mirrors apparatus, and orders can be placed through the contact page.
Frequently Asked Questions
Why use a mirror strip instead of a larger mirror?
A strip stands upright easily along a drawn line and leaves most of the paper free for drawing rays. Its narrow height is no drawback, because ray tracing happens in the plane of the paper.
Which line should be drawn as the mirror position?
For a back-silvered mirror, draw along the silvered back surface, where reflection takes place. Drawing along the front glass face introduces a small, systematic error in the reflected rays.
How do I locate an image by no parallax?
Place a search pin behind the mirror and move your head from side to side. When the search pin, seen over the top of the mirror, and the image of the object pin stay together without separating, the search pin marks the image position.
What is lateral inversion?
A plane mirror reverses front and back along the line of sight, so a right hand appears as a left hand. Writing seen in the mirror therefore reads backwards.
How many images form between two mirrors at an angle?
For mirrors at an angle θ, the number of images equals 360/θ minus 1 when 360/θ is a whole number. At 90 degrees, three images form; at 60 degrees, five.
How does a mirror strip help avoid parallax on a scale?
Fixed behind a pointer, the mirror shows the pointer’s image. When the eye is placed so that the pointer hides its own image, the line of sight is perpendicular to the scale and the reading is free of parallax.
Last Updated: October 2026










Reviews
There are no reviews yet.