Search

In Stock

Membrane Melde’s Vibrator

Vibreur de Melde à membrane, High-Flexibility Mechanical Output Arm Facilitates accurate student Analysis of node and antinode formations, supporting the quantification of wave speed under varying string tension.

Ruggedized Diaphragm Architecture Minimizes vibrational fatigue during intensive vocational rotations, ensuring the Evaluation of longitudinal and transverse wave behavior remains consistent across large student cohorts.

$39.77

Quick Answer: This Melde’s vibrator uses a membrane drive: an electrically driven diaphragm, working like a loudspeaker, moves a small rod that shakes the end of a string at the frequency set on a signal generator. It is the driver for Melde’s experiment on standing waves in strings and for accessories such as a circular string.

How a Membrane Vibrator Drives a String

Inside a membrane vibrator, alternating current from a signal generator flows through a coil sitting in the field of a permanent magnet, as in a loudspeaker. The coil is pushed and pulled in time with the current and carries the membrane with it, and a rod fixed to the membrane passes that motion to whatever is attached. Because the frequency comes from the generator, it can be set anywhere in the low range and changed smoothly, which the classic tuning-fork version of Melde’s experiment could not do.

That freedom changes the practical. Instead of adjusting the tension until a pattern appears at a fixed fork frequency, students can keep the string, length and load fixed and raise the frequency, watching the string jump from one loop to two, three and more at evenly spaced frequencies. The spacing of those resonances, f₁, 2f₁, 3f₁, is one of the clearest experimental demonstrations of harmonics.

Applications

  • Melde’s experiment on standing waves in a stretched string
  • Showing harmonics by sweeping the frequency at constant tension
  • Measuring wave speed on a string from frequency and loop length
  • Driving a circular string to demonstrate whole-wavelength resonance

Setting Up the Vibrator

Clamp the vibrator firmly so its body cannot move, attach the string to the drive rod, and run the string to a pulley and mass hanger, or fix it to a rigid support for a constant-tension set-up. Begin with the generator output low and the frequency below the first resonance, then sweep upwards; near each resonance the amplitude grows quickly, so reduce the output if the string starts to slap or the vibrator buzzes.

The same vibrator can drive other wave accessories. LabEquip lists a circular string made for use on a Melde’s vibrator, which shows standing waves around a closed ring, and a string for Melde’s vibrator for the straight-string experiment; check that the fixings match when ordering.

Specifications

Item Melde’s vibrator with a membrane (diaphragm) drive
Drive Coil and magnet moving a membrane and drive rod
Power From an external low-frequency signal generator
Used with String, pulley and masses, or a circular string accessory
Shows Standing waves, harmonics and resonance in strings
Connection, power rating and fixings Confirm at enquiry

Care & Handling

  • Keep the generator output within the vibrator’s rating and turn it down before switching on
  • Align the string with the direction of motion so it does not pull the drive rod sideways
  • Switch off before attaching or removing strings
  • Store the vibrator with nothing hanging from the drive rod so the membrane is not strained

Why Choose LabEquip

Physics departments buy this vibrator to run Melde’s experiment from a signal generator instead of a tuning fork, at senior-school and college level. LabEquip supplies it with string and ring accessories and other physics lab equipment; send your generator details through LabEquip contact.

Frequently Asked Questions

What does the membrane in this Melde’s vibrator do?

The membrane is moved by a coil in a magnetic field, as in a loudspeaker, and carries the drive rod with it. It turns the alternating signal from the generator into a back-and-forth motion at the same frequency.

Why use a signal generator instead of a tuning fork?

A tuning fork gives one fixed frequency, so the tension has to be changed to find patterns. A generator lets you choose and vary the frequency, which makes it easy to show harmonics at constant tension.

At what frequencies do the harmonics appear?

For a string with fixed ends, resonances occur at whole-number multiples of the lowest frequency. If the single-loop pattern appears at f, the next ones appear at about 2f, 3f and so on.

Can the vibrator drive the string along its length?

If the vibrator is mounted so the rod moves along the string, the string vibrates at half the driving frequency. Mounted so the rod moves across the string, the string vibrates at the driving frequency.

Why does the vibrator buzz near resonance?

At resonance the string draws more energy, its amplitude grows, and the moving parts can reach the ends of their travel. Reduce the generator output until the motion is smooth.

What signal generator do I need?

A low-frequency signal generator with a power output able to drive a small loudspeaker-type load is normally used. Tell us your generator model and we will check that it suits this vibrator.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)