Search

In Stock

Masses (Weights) Set, Steel, Knobbed, Chrome Plated

Electro-Polished Chrome Shielding: Forged from high-density carbon steel with a multi-layer chromium finish to mitigate oxidative degradation and maintain constant mass integrity across fluctuating laboratory humidity levels.

Interference-Free Knobbed Architecture: Designed with precision-machined handling knobs to facilitate safe displacement via forceps, preventing the transfer of skin oils that cause microscopic mass fluctuations in sensitive analytical tasks.

₹675.00

Quick Answer: The Masses (Weights) Set, Steel, Knobbed, Chrome Plated is a cased set of cylindrical steel weights with a lifting knob on top and a chrome-plated finish. The knobbed steel weights set is used on balance pans, both for weighing by comparison and for routine checks of electronic balances.

A Routine Check for Electronic Balances

Electronic top-pan balances in school and college labs are moved, knocked and used by many hands, and their readings can drift without anyone noticing. A short routine catches problems early. Before the first class of the day the balance is levelled, switched on, allowed to warm up and zeroed with an empty pan. A knobbed weight near the middle of the balance’s range is placed in the centre of the pan, and the reading is written in a log beside the date. A reading that wanders from earlier entries is the signal to recalibrate or service the balance.

A corner-load test adds a second check. The same weight is placed in turn at the centre and near the front, back, left and right of the pan. A well-adjusted balance shows the same reading at every position; differences point to a damaged pan support or a fault in the weighing cell.

Why the Knob and the Finish

The knob gives forceps or gloved fingers a secure grip and keeps hands off the body of the weight. The flat base sits squarely on a pan, and the cylindrical shape stacks on larger pieces without rolling. Chrome plating over steel gives a hard, cleanable surface that resists rust. Being steel, the weights can be attracted by magnets, so they should be stored away from magnetic stirrers and permanent magnets.

Uses

  • Daily reading checks of electronic top-pan balances
  • Corner-load (eccentric loading) tests on balance pans
  • Weighing by comparison on beam and pan balances
  • Teaching students why instruments need regular checks and records

Specifications

Set type Knobbed (cylindrical, knob-top) weights in a case
Material Steel
Finish Chrome plated
Handling Forceps or gloves, gripping the knob
Denominations and case Confirm at enquiry

Care & Handling

  • Grip each piece of the knobbed steel weights set by its knob, with forceps or gloves.
  • Place weights in the centre of the pan unless deliberately testing corner loading.
  • Keep the case closed and away from magnets, damp and acid fumes.
  • Wipe with a soft dry cloth; abrasive cleaners wear through the plating.

Why Choose LabEquip

Lab technicians and teachers who look after several electronic balances buy a knobbed set as their everyday check weights. LabEquip lists it in its Physics Equipments range; laboratories that prefer a non-magnetic set can choose the knobbed brass masses set. Send your balance types through the contact page.

Frequently Asked Questions

How often should a school balance be checked?

A quick check with one known weight before each day of use is enough for most school balances, with a fuller check across several weights each term. Whenever a balance is moved, it should be relevelled and checked again.

What does a corner-load test show?

It shows whether the reading depends on where the load sits on the pan. The same weight placed at the centre and near each edge should give the same result; differences point to a mechanical problem in the pan support or weighing cell.

Why are the weights knobbed?

The knob gives a secure place to grip with forceps or gloves, so the weight is lifted without touching its body. It also makes the pieces easy to identify and stack.

Can steel weights affect an electronic balance?

Steel is magnetic. A steel weight that has become magnetised can interact with magnetic parts in some balances or with a steel pan support, giving a slightly wrong reading. Storing the set away from magnets keeps this risk low.

Which weight should I use for a daily check?

Choose a weight close to the load you usually weigh, or about half the balance’s capacity. Using the same piece every day makes drift easy to spot in the log.

Can these weights replace a calibration by a service engineer?

They show whether a balance is reading consistently, which is what routine checks need. Formal calibration with traceable reference weights is a separate service, carried out periodically or when a check reveals a problem.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)