Search

In Stock

Masses (Weights) Set, Physical

Nickel-Plated Brass Composition: Each mass is precision-machined from high-density brass and finished with a protective nickel coating to minimize oxidation, maintaining calibration accuracy and mass integrity over extended duty cycles.

Traceable Handling Integration: The set includes specialized non-magnetic forceps and is housed in a polished, felt-lined hardwood block, preventing skin-oil contamination and microscopic surface abrasion during critical mass-determination procedures.

₹1,130.00

Quick Answer: The Masses (Weights) Set, Physical is a boxed set of standard masses made to accompany a physical balance, the glass-cased beam balance of school and college physics laboratories. A physical weights set supplies the known masses for weighing by comparison in practicals such as density and relative density determinations.

Relative Density with a Specific Gravity Bottle

The specific gravity bottle practical is built entirely on careful weighing. The clean, dry bottle and its stopper are weighed first (W1). The bottle is then filled with distilled water, the stopper pushed in so that excess water escapes through its fine bore, the outside dried and the bottle weighed again (W2). Finally it is emptied, dried, filled with the test liquid and weighed a third time (W3). Because the bottle holds the same volume each time, the relative density of the liquid is (W3 − W1) ÷ (W2 − W1).

With a fourth weighing the same bottle finds the relative density of sand or lead shot that does not dissolve in water. Each answer depends on differences between masses of similar size, so the weights must agree with one another, be handled with forceps and kept clean; one damaged piece would bias every reading that uses it.

Reading the Weights from the Box

A useful habit is to record the weights by reading the empty recesses in the box, then to check the total again as the pieces go back. Counting gaps is quicker and more reliable than adding up pieces crowded on a pan, and it catches a piece left behind on the bench. Working from the largest likely piece downward, changing one piece at a time, keeps the number of trials small and the beam steady.

Practicals That Use the Set

  • Weighing by comparison on physical balances in school and college practicals
  • Relative density of liquids and granular solids with a specific gravity bottle
  • Finding the masses of calorimeters, liquids and specimens for heat and density experiments
  • Practical examinations that need a complete set at every bench

Specifications

Set type Weights for a physical balance, in a fitted box
Used with Physical (beam) balance with pointer and scale
Weighing method Comparison against the load on the other pan
Handling With forceps
Denominations, material and fractional pieces Confirm at enquiry

Care & Handling

  • Arrest the beam of the balance before adding or removing any piece from the physical weights set.
  • Lift pieces with forceps and place them in the centre of the pan.
  • Close the balance case while taking readings so that air currents do not disturb the beam.
  • Return every piece to its place in the box at the end of the practical and check that none are missing.

Why Choose LabEquip

Physics laboratories order these sets one per physical balance so that each bench is complete for practical examinations. LabEquip lists the set in its Physics Equipments range, alongside the iron physical weight box (100 g) for more basic class weighing. Send your balance count through the contact page.

Frequently Asked Questions

How is the relative density of a liquid found with a physical balance?

Weigh a specific gravity bottle empty, then full of water, then full of the liquid. The relative density is the mass of liquid divided by the mass of the same volume of water, that is (W3 − W1) divided by (W2 − W1).

Why should the beam be arrested before changing weights?

Dropping a weight onto a free pan jolts the beam and its knife-edges. Arresting lifts the beam off the knife-edges so they are not chipped or blunted, which keeps the balance sensitive and accurate.

Why record weights from the empty places in the box?

The gaps show exactly which pieces are on the pan, so the total can be added up without lifting them, and a second count as they are returned catches mistakes. It also shows at once if a piece has been left on the bench.

Why use forceps instead of fingers?

Fingers leave moisture and grease that change the mass of small pieces and corrode metal over time. Forceps also keep hand warmth away from the weights, so they stay at room temperature.

How does a physical weights set differ from a weight box for a common balance?

Sets for physical balances usually go down to small fractional pieces and are handled with forceps, because the balance is sensitive enough to show small differences. Sets for common or pan balances are coarser and sturdier.

In what order should the weights be tried?

Start with the largest piece that might be needed. If it is too heavy, replace it with the next smaller one; if it is too light, keep it and add the next smaller piece. Working downward in this way reaches balance in the fewest steps.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)