Search

In Stock

Marked Masses in Newtons

Masses marquées en Newton, Factory-Calibrated Mass Parity Supports the rigorous Application of mechanical advantage principles in pulley-driven trials, ensuring experimental consistency and data integrity.

High-Contrast Engraved Denominations ensure rapid Identification and organization during high-cadence laboratory rotations, reducing setup time for institutional lab managers.

$139.87

Quick Answer: Masses marked in newtons are laboratory masses labelled with their weight, the gravitational force on them, instead of their mass in grams. Masses marked in newtons let students apply known forces directly in statics, moments and spring experiments without converting grams to newtons each time.

What a Newton Label Really Means

A label in newtons describes a force, and the force on a mass depends on where it is. On Earth the gravitational field strength g is about 9.81 N/kg, so a piece labelled 1 N has a mass of about 102 g. Some teaching sets round g to 10 N/kg, in which case the same label goes with a mass of 100 g. Students can find out which convention a set uses by weighing a piece on a balance and multiplying the mass in kilograms by 9.81.

The difference is about 2 percent. It rarely matters in a moments or equilibrium practical, but it is a good discussion point when a careful experiment comes out consistently 2 percent off.

Working Directly in Forces

The advantage of masses marked in newtons is that the number on the piece goes straight into the calculation. In a moments experiment a 2 N piece hung 0.15 m from the pivot gives a moment of 0.30 N m with no conversion. In Hooke’s law work the force axis of the graph is filled in directly from the labels.

They also make a quick check on a force meter: hang a marked piece from it and the reading should match the label. A force meter that disagrees with several pieces by the same proportion has a scale or spring problem.

Specifications

Product Laboratory masses labelled with their weight in newtons
Quantity marked Weight (force) rather than mass
Typical use Statics, moments, Hooke’s law, force meter checks
Conversion Mass in kg = weight in N ÷ g
Values in the set and form (hooked or slotted) Confirm at enquiry

Practicals

  • Applying known forces in equilibrium and moments experiments
  • Plotting Hooke’s law graphs with force read straight from the labels
  • Checking the readings of spring force meters
  • Teaching the difference between mass and weight

Care & Handling

  • Keep the labels clean and legible; a misread value spoils a whole set of results
  • Return each piece to its place in the storage box after use
  • Do not drop pieces onto springs or beams; lower them gently
  • Store dry so the surface does not corrode and change the mass

Why Choose LabEquip

Middle and secondary schools that teach forces before mass conversions are secure often prefer masses marked in newtons for early statics. LabEquip can supply them with a Sauter 283 dynamometer for checking readings and other physics lab equipment; contact LabEquip for the values your lessons use.

Frequently Asked Questions

Why are the masses marked in newtons instead of grams?

So the force they apply can be used directly. In statics and moments work the force is what goes into the calculation, and the label saves a conversion at every step.

What is the actual mass of a piece marked 1 N?

About 102 g if the label assumes g = 9.81 N/kg, or exactly 100 g if it assumes 10 N/kg. Weighing one piece on a balance shows which convention the set follows.

Would the markings be correct on the Moon?

No. On the Moon g is about 1.6 N/kg, so a piece labelled 1 N would weigh only about 0.17 N there. Its mass would be unchanged; only the force depends on location.

How can they be used to check a spring force meter?

Hang one marked piece at a time from the force meter and compare the reading with the label. Readings that are all high or all low by the same percentage point to a scale or spring fault.

Can they be used in moments experiments?

Yes, and they simplify them. Multiplying the labelled force by its distance from the pivot in metres gives the moment in newton metres straight away.

Which values does the set contain?

The values and the form of the pieces can be confirmed at enquiry. For moments and equilibrium work, a set that includes several equal pieces of the smaller values is the most flexible.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)