Search

In Stock

Manual Endoscope

Ondoscope manuel, Modular Refractive Obstacles & Dippers enables the technical Analysis of wave behavior across varying medium densities, reinforcing the understanding of Huygens-Fresnel principles.

High-Contrast Optical Projection Surface Expérience démonstrative Supports accurate student Application of Snell’s Law through the measurement of incident and refracted angles in standardized laboratory environments.

₹4,650.00

Quick Answer: This manual wave machine, known in French catalogues as an ondoscope, is a long row of horizontal rods fixed at their centres to a central cord or band that is held taut between its ends. Twisting one end by hand sends a slow transverse wave along the row, so a class can watch pulses travel, reflect and overlap.

How Twisting Rods Show a Transverse Wave

Each rod is fixed at its middle to the central cord, so when one rod is turned it twists the cord, and the twist pulls the next rod round a moment later. The disturbance travels down the row as a torsional wave, but because the eye follows the rod ends, which move up and down, it looks exactly like a transverse wave on a string, slowed enough to follow comfortably. The wave speed depends on how stiff the cord is in twisting and on the moment of inertia of each rod, so heavier or longer rods give a slower wave.

Machines of this type often carry small masses that can be slid along the rods. Moving them outwards raises the moment of inertia and slows the wave, which lets a teacher show that wave speed is a property of the medium, not of the source.

Demonstrations with a Hand-Operated Machine

Because the machine is driven by hand, it is ideal for single pulses. A quick twist of the end rod sends one pulse along the row; at a fixed end it comes back inverted, and at a free end it comes back the same way up, a contrast that is hard to show so clearly with a rope. Sending pulses from both ends at once shows superposition: two upward pulses add as they cross, while an upward and a downward pulse briefly cancel and then pass through each other unchanged.

With a steady rhythmic twist the teacher can build up a standing wave, finding by feel the rhythm at which the pattern grows with little effort, which is a direct experience of resonance. A metre rule held beside the row lets students estimate the wavelength. For a version that generates waves at a set frequency without a hand drive, LabEquip lists a motorised folding wave machine.

Specifications

Item Hand-operated wave machine (ondoscope)
Construction Row of rods fixed at their centres to a central cord or band
Wave shown Slow transverse wave carried by twisting of the cord
Excitation By hand, at one end
Shows Pulses, reflection, superposition, standing waves
Length, rod count and accessories Confirm at enquiry

What Teachers Show with It

  • Demonstrating transverse pulses and their speed
  • Comparing reflection at fixed and free ends
  • Showing superposition of pulses sent from opposite ends
  • Building standing waves and introducing resonance

Care & Handling

  • Lay the machine out straight on a long bench, or hang it, so the rods do not tangle
  • Twist the end smoothly; a violent twist can kink the central cord or knock rods out of line
  • Check that the rods are parallel and evenly spaced before a demonstration
  • Store the machine as recommended, without crushing or bending the rods

Why Choose LabEquip

Teachers who want a large, slow, visible wave for whole-class teaching buy the manual wave machine for lower and upper secondary physics. LabEquip offers it with other physics lab equipment for waves; ask about its length and storage through LabEquip contact.

Frequently Asked Questions

What does the name ondoscope mean?

Ondoscope is the name used in French catalogues for this kind of wave machine; the word simply means a device for viewing waves. In English it is usually called a wave machine or a torsion wave machine.

Is the wave on this machine really transverse?

The cord itself twists, but the rod ends move at right angles to the direction the wave travels, so what students see is a transverse wave. It is a slowed-down model of a wave on a string.

What happens to a pulse at the end of the machine?

If the last rod is held fixed, the pulse reflects upside down. If the last rod is free to turn, it reflects the same way up. The machine shows both clearly.

How can the wave be slowed down?

Increasing the moment of inertia of the rods, for example by sliding masses outwards where the design allows, slows the wave. A cord that twists more easily would also slow it.

Can it show a standing wave?

Yes. Twisting the end rhythmically at the right rate makes the reflected and incoming waves combine into a standing wave with fixed nodes and antinodes.

How is it different from the motorised machine?

This version is driven by hand, which suits single pulses and quick demonstrations. A motorised machine drives the end rod at a set, steady frequency, which is better for measuring wavelength and frequency.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)