Quick Answer: The Magnetic Compass, Large (Magnetometer), is a large magnetic compass in a box, of the kind used as the indicating part of a magnetometer. Its size makes the needle easy to read from across a bench, so it is used for marking the magnetic meridian before experiments and for showing deflections to a group.
A Compass Built for Reading Directions and Deflections
Pocket and plotting compasses are made small so that they sample the field at one point. A large magnetic compass is made for the opposite reason: its needle and scale are big enough for a group to read the direction and any change in it. In magnetometer use the needle sits on a pivot in a box with a glass cover, and its position is read against a scale marked round the box. Whether this model carries a pointer and degree scale in four quadrants, as many magnetometer compasses do, is worth checking when ordering.
Unlike the deflection magnetometer, which adds two long graduated arms for placing a magnet at measured distances, the large compass is a self-contained box. It can be used on its own, set beside an arm or rule, or placed inside a coil.
Uses in the Magnetism Laboratory
- Marking the magnetic meridian before magnetometer and tangent galvanometer experiments
- Demonstrating Oersted’s experiment, the deflection of a needle by a current in a wire above it
- Showing how the deflection by a bar magnet falls off as the magnet is moved away
- Detecting whether an object is magnetised or contains iron
Marking the Magnetic Meridian
Most magnetism and tangent galvanometer practicals begin by drawing the magnetic meridian, the north-south line along which the Earth’s field lies, on the table or on a sheet of paper. With the large compass at the centre of the paper, pins or pencil dots are placed in line with the two ends of the needle and joined, and the east-west line is drawn at right angles. The apparatus for the main experiment is then aligned with these lines.
A large needle makes this step quicker and more precise, especially when several groups share a laboratory and each needs its own reference line.
Specifications
| Type | Large magnetic compass, magnetometer type |
| Indicator | Pivoted magnetic needle in a covered box |
| Main purpose | Showing field direction and deflections clearly to a group |
| Typical use | Marking the magnetic meridian; demonstrations of magnetic deflection |
| Scale, pointer and box size | Confirm at enquiry |
Care & Handling
- Keep the compass away from strong magnets, which can weaken or reverse its needle.
- Rest it level on a wooden surface and let the needle settle before reading.
- Carry and store the box flat so that the needle does not knock against the pivot.
- Clean the cover gently with a soft cloth.
Why Choose LabEquip
Physics laboratories buy a large magnetic compass for the set-up steps and demonstrations that small compasses make awkward, and as a general reference compass for the magnetism bench. LabEquip lists it in its physics equipment category, and the scale and pointer arrangement of the current model can be confirmed through the contact page.
Frequently Asked Questions
How is this compass different from a plotting compass?
A plotting compass is small so that it shows the field direction at almost a single point when tracing field lines. The large compass is made to be read easily and to show deflections clearly, so it suits set-up and demonstration work.
How is the magnetic meridian marked with a large compass?
Place the compass on the paper away from iron and magnets, let the needle settle and mark dots in line with both ends of the needle. Remove the compass and join the dots; this is the magnetic north-south line.
Can it be used to show Oersted’s experiment?
Yes. Stretch a wire north-south just above the compass and pass a current briefly from a low-voltage supply. The needle swings away from the meridian, and reversing the current reverses the swing.
Can the large compass replace a deflection magnetometer?
Only partly. It shows deflections well, but a deflection magnetometer has graduated arms for placing magnets at measured distances and a scale designed for precise angle readings, which quantitative work requires.
Why does the needle sometimes settle slowly or stick?
A slightly tilted box, dust on the pivot or a weakened needle can all cause it. Level the compass, tap the box gently and test the needle with a bar magnet; a needle that responds weakly may need remagnetising.
Where should the compass be used in a laboratory?
On a wooden bench well away from steel furniture, radiators, power cables and stored magnets, since each of these can turn the needle away from the true magnetic meridian.
Last Updated: October 2026










Reviews
There are no reviews yet.