Search

In Stock

LED 10W Projector IP65

Projecteur à LED 10W IP65 Engineered with a specialized gasket system providing total protection against dust ingress and low-pressure water jets, ensuring operational continuity in moisture-heavy or volatile laboratory environments.

Die-Cast Aluminum Heat Sink Incorporates an integrated thermal management chassis to optimize heat dissipation, maintaining a constant junction temperature and preventing spectral shifting during sustained 10W high-output duty cycles.

₹1,450.00

Quick Answer: This is a 10 W LED floodlight with an IP65 rating, the two values in its name, mounted in a carry frame with a handle and fitted with a mains cable and plug, as pictured. The 10W LED floodlight serves as a bright, steady and relatively cool light source for solar cell practicals and for lighting experiments that are filmed.

What IP65 Means

An IP code describes protection against solids and water. In IP65, the first digit, 6, means the enclosure is dust-tight; the second, 5, means it is protected against water jets from any direction. For a floodlight that may be used outdoors, at a damp field-study site or in a busy prep room, that matters more than it would for a bench lamp.

The rating applies to the closed enclosure in good condition. A cracked lens or a damaged cable entry can let water in, so the protection holds only while the floodlight is undamaged.

Specifications

Product LED floodlight on carry frame
Power, from title 10 W
Ingress protection, from title IP65
Construction in photograph Floodlight head in a tubular frame with handle, mains cable and plug
Light source LED
Colour temperature and beam angle Confirm at enquiry

Using an LED Floodlight in Experiments

A solar cell’s output depends strongly on the light reaching it, so the practical needs a source that is bright, steady and repeatable. The 10W LED floodlight converts more of its electrical input into light and less into heat than a filament lamp of similar brightness, so the cell is warmed less during a long run. With the distance and angle fixed, readings from one session can be compared fairly with the next.

Bright light is also needed when motion is filmed for video analysis at high frame rates. Some LED drivers vary their output at twice the mains frequency, which shows up as flicker or banding in slow-motion footage, so a quick test with the camera you will use shows whether the floodlight suits that work.

Applications

  • Lighting a solar cell or panel at a fixed distance in power-output practicals
  • Illuminating fast motion for video analysis with a phone or camera
  • Comparing the heat given off by an LED source and a filament or halogen lamp
  • Bright general lighting for outdoor or field-study set-ups

Care & Handling

  • Do not look into the LED at close range while it is on
  • Inspect the cable and plug before use and keep the cable clear of water
  • Let the housing cool before packing it away
  • Wipe the lens with a soft cloth to keep the light output consistent

Why Choose LabEquip

Physics teachers choose an LED floodlight when a solar cell practical needs light that is bright, cool and the same every lesson. For a lamp that also shows a continuous spectrum, see the 12V halogen bulbs; contact LabEquip about plug type and quantities, or explore our physics lab equipment.

Frequently Asked Questions

What does IP65 mean on this floodlight?

The 6 means dust-tight and the 5 means protected against water jets from any direction. The protection depends on the housing and cable entry being undamaged.

Why use an LED floodlight rather than a filament lamp for solar cell work?

LEDs turn more of their input into light and less into heat. The solar cell is warmed less during a run, so its output depends mainly on the light rather than on its temperature.

Why does the floodlight cause flicker in slow-motion video?

Some LED drivers vary their light output at twice the mains frequency, and a high-frame-rate camera captures this as flicker or banding. Test with your own camera before filming a practical.

Is the light from an LED floodlight a continuous spectrum?

White LEDs usually combine a blue LED with a phosphor, giving a blue peak and a broad yellow band rather than the smooth spectrum of a hot filament. This is easy to see through a diffraction grating.

Does the floodlight get hot?

Less than a filament lamp of similar brightness, but the housing still warms because the LED and its driver produce some heat. Let it cool before handling the head.

What plug does the floodlight have?

The photograph shows a mains cable with a round-pin plug. Plug types differ between countries, so confirm that it suits your sockets when you enquire.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)