Search

In Stock

Joule’s Mechanical Heat Experiment Apparatus

Dynamic Friction Assembly: Features a precision-machined copper calorimeter cone paired with a heavy-duty friction belt, optimized for uniform heat generation through controlled mechanical displacement and minimized ambient energy loss.

Integrated Mechanical Tachometer: Equipped with a high-resolution revolution counter that allows for precise tracking of rotational cycles, ensuring accurate input data for calculating work-to-heat conversion coefficients during experimental trials.

$69.08

Quick Answer: Joule’s Mechanical Heat Experiment Apparatus is a mechanical equivalent of heat apparatus that turns measured mechanical work into a measurable rise in the temperature of water. Students compare the work done with the heat produced to find J, the number of joules equivalent to one calorie.

Joule’s Experiment in Brief

In the 1840s James Prescott Joule let weights fall through a measured height, turning a paddle wheel inside an insulated vessel of water. Fixed vanes inside the vessel stopped the water simply swirling round, so the paddles churned it and the work done by the falling weights appeared as a slight rise in water temperature. Repeating the fall many times built up a rise large enough to read.

The result showed that heat is a form of energy and that a fixed amount of work always produces the same amount of heat. Joule’s figure is close to the modern value of about 4.2 joules for each calorie. A laboratory apparatus of this name lets students repeat the same chain of reasoning with their own measurements, which is why it appears in the energy and thermodynamics sections of many physics courses.

Calculating J from the Readings

The work done is the weight of the falling masses times the height of each fall times the number of falls. The heat produced is the mass of water times its specific heat capacity times the temperature rise, plus the heat taken up by the vessel and paddles. Dividing work by heat in calories gives J.

Because the temperature rise is small, a sensitive thermometer read to a fraction of a degree is essential, and stirring before each reading makes sure the whole volume of water is at one temperature. Doing the falls briskly limits the time during which heat can leak away.

Classroom and Laboratory Uses

  • Determining the mechanical equivalent of heat, J, from the work done and the heat gained
  • Teaching the conservation of energy and the conversion of work into internal energy
  • Discussing the history of thermodynamics and the caloric theory it replaced
  • Estimating heat losses and comparing a measured J with the accepted value

Specifications

Type Apparatus for Joule’s mechanical equivalent of heat experiment
Principle Mechanical work done on water is converted to heat
Quantities measured Masses, height of fall, number of falls, mass of water, temperature rise
Used with Laboratory thermometer, balance and metre rule
Mechanism and accessories supplied Confirm at enquiry

Care & Handling

  • Check that cords are wound evenly and not frayed before every run.
  • Keep hands and feet clear of the path of the falling masses.
  • Empty and dry the water vessel after use, and keep the bearings free of water.
  • Lift the masses back up by hand rather than letting them drop onto the floor or bench.

Why Choose LabEquip

Physics teachers buy this apparatus to give students a hands-on version of a landmark experiment, alongside the copper calorimeter and thermometers used across the heat syllabus. It sits within LabEquip’s physics equipment category, and details of the mechanism and accessories in the current model can be requested through our contact page.

Frequently Asked Questions

What value of J should students expect?

The accepted value is about 4.2 joules per calorie. Classroom results usually come out somewhat higher, because some of the work is lost to friction in bearings and pulleys and some heat escapes from the water before the final reading.

Why is the temperature rise in the experiment so small?

The work from one fall of a laboratory mass through a short height is small compared with the energy needed to warm water by one degree. Using a small mass of water and many repeated falls makes the rise large enough to read.

Why are fixed vanes fitted inside Joule’s vessel?

In the classic paddle-wheel design the fixed vanes stop the water rotating as a whole with the paddles. The water is churned instead, so the work goes into heating it rather than into the kinetic energy of a spinning mass of water.

How can heat losses be reduced in this experiment?

Insulate the vessel, keep the experiment short, and start with the water slightly below room temperature so that it ends a similar amount above it. Heat gained in the first half then roughly balances heat lost in the second.

How does this method differ from measuring J electrically?

In the electrical method a heater supplies energy found from voltage, current and time. The mechanical apparatus measures work directly from falling weights, so it shows the conversion of work into heat more visibly, though it is usually less precise.

What should be checked before the masses are released?

Check that the cords run freely over their pulleys, the clamps holding the apparatus are tight, and the floor beneath the masses is clear. Students should stand to one side and let the masses descend steadily rather than drop.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)