Search

In Stock

Inclined Plane, Deluxe

Dual-Scale Angular Precision: Features a high-visibility, 0-45° graduated protractor and an integrated vertical linear scale, enabling sub-degree accuracy for calculating gravitational components and the angle of repose.

Low-Friction Pulley System: Equipped with an adjustable, low-inertia ball-bearing pulley and a nickel-plated scale pan to ensure minimal parasitic resistance during sensitive static and kinetic friction measurements.

$5.41

Quick Answer: The deluxe inclined plane is the fuller version of the school inclined plane, an adjustable slope with an angle scale and pulley on which blocks, rollers or carriages can be pulled or allowed to slide. It is widely used to measure friction on a slope and to calculate coefficients of friction for different surfaces.

Friction on a Slope

On a level bench, friction between a block and the surface depends on the normal reaction, which there equals the block’s weight. On a slope the normal reaction is smaller, equal to the weight multiplied by the cosine of the angle, so friction falls as the slope steepens. Meanwhile the component of weight pulling the block downhill grows with the sine of the angle. The inclined plane lets students change both at once with a single adjustment.

Three measurements follow from this. Raising the plane slowly until a block just begins to slide gives the limiting angle, and the tangent of that angle equals the coefficient of static friction. Finding the angle at which a block, once started, slides down at steady speed gives the coefficient of kinetic friction in the same way. With the pulley and pan, the load needed to pull the block up the slope at steady speed gives a third route: that pull equals the weight times the sine of the angle plus the coefficient of friction times the normal reaction.

Comparing blocks faced with different materials, such as wood, glass or rubber, shows that the coefficient depends on the pair of surfaces in contact, not on the area of contact.

Specifications

Type Adjustable inclined plane, deluxe model
Angle Adjustable, read on the plane scale
Effort Pulley at the top of the plane with thread and pan
Studies Friction, angle of repose, forces on a slope
Accessories and angle mechanism Confirm at enquiry

Deluxe Version

Deluxe here marks the fuller model in the inclined plane range, typically chosen when a department wants one plane to serve both force-resolution and friction practicals. The accessories included, such as rollers, blocks with different faces and weight sets, and the method of angle adjustment, vary between catalogues and should be confirmed at enquiry.

Applications

  • Finding the coefficient of static friction from the limiting angle
  • Measuring the coefficient of kinetic friction from steady sliding
  • Comparing friction for different surface materials
  • Showing that the force needed to pull a block up a slope exceeds that needed to lower it

Care & Handling

  • Keep the plane surface clean, dry and free of polish or wax, which change friction.
  • Store blocks so their faces are not scratched or dented.
  • Raise and lower the plane gently so the hinge and angle scale stay accurate.
  • Lubricate the pulley lightly, keeping oil away from the plane surface.

Why Choose LabEquip

Science departments that want one inclined plane to cover friction as well as force resolution choose the deluxe inclined plane, while the brass inclined plane focuses on the roller experiment. Both are in LabEquip’s physics lab equipment, and the accessories you need can be agreed through our contact page.

Frequently Asked Questions

How is the coefficient of static friction found on an inclined plane?

Raise the plane slowly until the block just starts to slide. At that angle, the coefficient of static friction equals the tangent of the angle of inclination.

Why is the kinetic coefficient usually smaller than the static one?

Once surfaces are moving, they have less time to settle into close contact, so less force is needed to keep a block sliding than to start it moving. The steady-sliding angle is therefore smaller than the limiting angle.

Does the area of the block affect friction?

For ordinary dry surfaces, no. Friction depends mainly on the materials and the normal reaction, which students can check by sliding the same block on faces of different area.

Why does friction decrease as the plane gets steeper?

Friction depends on the normal reaction, which equals the weight multiplied by the cosine of the angle. As the angle increases, the cosine and therefore the normal reaction become smaller.

What does deluxe mean for this inclined plane?

It marks the fuller model in the range, intended to support friction as well as force practicals. The accessories included with the deluxe version can be confirmed when ordering.

Why is more force needed to pull a block up the slope than to let it down slowly?

Going up, friction acts down the slope and adds to the weight component the pull must overcome. Going down, friction acts up the slope and helps hold the block back.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)