Search

In Stock

High-Quality Split Weights with Hooks (20g each), Rust-Resistant

Precision Metallurgical Composition: Fabricated from a high-density, non-corrosive alloy with a verified 1% mass tolerance, ensuring consistent gravitational force application for Hooke’s Law and pulley system analysis.

Modular Interlocking Geometry: Features an ergonomic "split" design with reinforced axial hooks, engineered for rapid vertical stacking and secure attachment to suspension hangers during high-velocity oscillation or centripetal force measurements.

$5.08

Quick Answer: The Split Weights with Hooks (20g each), Rust-Resistant are small slotted masses of 20 g each that stack on a hooked hanger, so a load can be built up or reduced in equal 20 g steps. As pictured, the slotted discs sit on a hanger with a hook at the top, ready to hang from a spring, a string or a lever.

Equal Small Steps for Hooke’s Law

Under normal gravity each 20 g step adds a force of about 0.196 N, usually rounded to 0.2 N in school work. That is a convenient size for light springs and rubber bands, which would be overstretched quickly by larger masses. Adding one disc at a time gives many points on a load-extension graph before the spring nears its elastic limit, and the gradient of the straight section gives the spring constant. The Hooke’s law apparatus provides the scale and support for this experiment.

Removing the discs again one by one and recording the extension on the way down shows whether the spring returns to its original length. If it does not, the elastic limit has been passed.

Why a Rust-Resistant Finish Matters for Small Masses

Rust adds material and then flakes away, so the mass of a corroding weight drifts. For a 20 g piece even a small change is a noticeable fraction of its value, which spoils the equal steps the experiment depends on. These weights are described in their title as rust-resistant; their material and finish, the number of discs supplied and whether the hanger itself counts as one 20 g step can be confirmed at enquiry. Keeping them dry and clean preserves their values whatever the finish.

Other Experiments That Need Fine Increments

Small, equal loads suit the principle of moments on a metre rule, where balance has to be found by adding little at a time; pulley systems with light loads; and the static-friction experiment, where discs are added to a hanger until a block on the bench just starts to slide. In the trolley experiment on Newton’s second law, discs can be moved from the trolley to the hanger, changing the accelerating force while keeping the total mass constant.

Applications

  • Load-extension measurements for springs and rubber bands (Hooke’s law)
  • Principle of moments experiments with a metre rule and knife edge
  • Newton’s second law with a trolley, transferring discs between trolley and hanger
  • Finding the limiting friction force on a block pulled over a bench

Specifications

Type Slotted split weights on a hooked hanger, as pictured
Mass per weight 20 g each, as titled
Finish Rust-resistant, as titled
Use Hanging loads for springs, levers, pulleys and friction experiments
Number of discs, hanger mass and material Confirm at enquiry

Care & Handling

  • Add and remove the split weights with hooks gently so the spring or lever is not jerked.
  • Keep the discs dry and wipe off moisture or salt before storing them.
  • Store the discs and hanger together in a box so pieces are not mixed with other masses.
  • Check the hook for bending before hanging a full stack of discs.

Why Choose LabEquip

Teachers buy small hooked weight sets so students can load springs and levers in many small, equal steps and get smooth, reliable graphs. LabEquip lists them with its mechanics lab equipment; for heavier loads, the 200 g copper split weights are the larger counterpart. Ask about set quantities through the contact page.

Frequently Asked Questions

What force does each 20 g weight add?

About 0.196 newtons under normal gravity of 9.81 metres per second squared. In school calculations this is often rounded to 0.2 newtons per disc.

Why use 20 g steps rather than heavier weights?

Light springs, rubber bands and delicate levers need small forces. Small steps keep the load below the elastic limit for longer and give more points on the graph, which makes the gradient more reliable.

Does the hanger count as part of the load?

Yes. The mass of the hanger must always be included in the total load. On many sets the hanger is made equal to one disc so the arithmetic stays simple, which can be checked on a balance.

What does rust-resistant mean for these weights?

It means the weights are made or finished so they resist corrosion in ordinary laboratory air. They should still be kept dry, because any corrosion slowly changes the mass of such small pieces.

Can these weights be used in the Newton’s second law trolley experiment?

Yes. Start with some discs on the trolley and move them one at a time to the hanger. The accelerating force increases while the total mass being accelerated stays the same.

How can the elastic limit of a spring be found with them?

Load the spring disc by disc, then unload it in the same steps. If the spring does not return to its original length when all the discs are removed, the elastic limit was exceeded during loading.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)