Search

In Stock

Helical standing wave spring

Ressort ondes stationnaires Hélicoïdal, Low-Damping Extension Coefficient Supports the Application of Hooke’s Law in dynamic contexts and the synthesis of longitudinal versus transverse kinetic behaviors.

Standardized Laboratory Length (3m) allows students to identify and measure harmonic frequencies and wavelengths in high-cadence undergraduate research trials.

₹1,040.00

Quick Answer: The helical standing wave spring is a long, open-coiled spring stretched between two fixed points and driven at one end so that waves reflect back and forth along it. At particular frequencies the helical standing wave spring settles into standing waves, with still nodes and strongly moving antinodes that the whole class can see.

Harmonics on a Stretched Spring

A wave sent along the helical standing wave spring reflects at the fixed far end and returns. When the length of the spring holds a whole number of half-wavelengths, the outgoing and returning waves reinforce and a stable pattern appears. The lowest frequency gives one loop, the fundamental; twice that frequency gives two loops, three times gives three, and so on: fₙ = nv/2L, where v is the wave speed and L the stretched length.

Counting loops and reading the driving frequency for each pattern gives a straight-line graph of frequency against the number of loops. Its gradient is v/2L, so the wave speed follows directly.

Tension, Transverse and Longitudinal Modes

Stretching the spring further raises the frequencies at which standing waves form, because the wave speed increases. For a spring, two things change at once: the tension T rises and the mass per unit length μ falls as the coils spread out, and both push v = √(T/μ) upward.

Driven sideways, the spring shows transverse standing waves like a vibrating string. Driven along its length, the coils bunch and spread, and the standing pattern appears as regions where the coils barely move between regions where they surge back and forth. In that longitudinal mode the displacement nodes are where the coil spacing changes most, which mirrors the pressure variations in a sounding pipe.

Demonstrations

  • Showing the fundamental and successive harmonics with nodes and antinodes
  • Measuring wave speed from the frequencies of several harmonics
  • Investigating how stretching the spring changes the resonant frequencies
  • Comparing transverse and longitudinal standing waves on one spring

Specifications

Product Helical spring for standing wave demonstrations
Wave types Transverse and longitudinal standing waves
Relation shown fₙ = nv/2L for a spring fixed at both ends
Driving method Mechanical vibrator and signal generator, or by hand for low modes
Spring length and any vibrator supplied Confirm at enquiry

Care & Handling

  • Never stretch the spring beyond the point where its coils stay open evenly after release
  • Release a stretched spring slowly from one end; a sudden release can whip and tangle it
  • Store it unstretched and untangled, ideally coiled on a tube or in its box
  • Keep the vibrator amplitude low at resonance so the spring does not jump off its fixing

Why Choose LabEquip

Schools and colleges choose a dedicated standing wave spring because its large, slow loops are easier for a whole room to see than a vibrating string. LabEquip also supplies the helical spring for longitudinal waves for pulse work and other physics lab equipment; ask LabEquip about vibrators and stands to go with it.

Frequently Asked Questions

What frequencies give standing waves on the spring?

The fundamental and its whole-number multiples. If one loop forms at 3 Hz, two loops form near 6 Hz and three near 9 Hz, because each pattern fits one more half-wavelength into the same length.

How do nodes differ from antinodes?

At a node the two travelling waves always cancel, so the coil there barely moves. At an antinode they reinforce, so the coil swings with the largest amplitude. Nodes are half a wavelength apart.

Why does stretching the spring further change the pattern?

Extra stretch increases the tension and spreads the coils, lowering the mass per unit length. Both raise the wave speed, so every harmonic moves to a higher frequency.

Can longitudinal standing waves be shown as well?

Yes. Drive the spring along its axis instead of sideways. The pattern shows as zones of nearly still coils separated by zones where the coils move back and forth strongly.

What drives the spring?

Usually a mechanical vibrator connected to a signal generator, so the frequency can be set precisely; low modes can also be driven by hand. Whether a vibrator comes with the spring can be confirmed at enquiry.

How can the pattern be seen clearly by a whole class?

Stretch the spring in front of a plain, contrasting background and light it from the side. A stroboscope set close to the driving frequency appears to slow the motion so the loops can be studied.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)