Search

In Stock

Galvanometer, EDSPOT

Internal Lamp and Scale Projection: Utilizes a built-in optical system to project a high-contrast light spot onto a translucent graduated scale, effectively magnifying pointer deflection to achieve sensitivities up to 200 mm/µA without mechanical friction.

Precision Torsion-Suspended Coil: Engineered with a low-inertia moving coil suspended by a high-tensile phosphor-bronze ribbon, ensuring rapid response times and a stable zero-point for critical null-balance measurements in DC bridges.

₹1,020.00

Quick Answer: An Edspot galvanometer is a light-spot galvanometer: a sensitive suspended movement turns a small mirror, and a beam from an internal lamp throws a bright spot with a hairline onto a long translucent scale. Teachers use it to make very small currents visible to a whole class, for example in electromagnetic induction demonstrations.

Light Spot Instead of a Pointer

A pointer has mass, and a heavier moving system needs more current to deflect it. The Edspot design avoids this by replacing the pointer with a beam of light. The suspended coil carries only a tiny mirror; light from a lamp inside the case reflects from it and lands as a spot on the scale. Because the beam acts as a weightless pointer, and because turning the mirror through an angle turns the reflected beam through twice that angle, very small currents give a deflection that is easy to see.

Instruments of this pattern usually have front controls for zero adjustment and for sensitivity, so the same galvanometer can follow a small induced current on its most sensitive setting or a larger current on a reduced one. Scale arrangements differ between versions, for example a centre-zero scale for currents that change direction or a left-zero scale for one-way currents, so the version supplied should be confirmed at enquiry.

Being mains-lit, the Edspot galvanometer is a bench instrument rather than a portable one. It is typically handled by the teacher, while students use cheaper milliammeters for their own circuits.

Using It in Front of a Class

For an induction demonstration, connect a coil to the galvanometer, start on the least sensitive setting and push a bar magnet into the coil. Increase sensitivity until the spot swings clearly. The class can then see that the spot moves only while the magnet moves, that reversing the magnet or its direction reverses the swing, and that a faster movement gives a larger deflection. A ready-made electromagnetic induction apparatus pairs naturally with it.

Specifications

Type Light-spot (lamp and scale) galvanometer, Edspot pattern
Indicator Illuminated spot with hairline on a translucent scale
Controls Zero adjustment and sensitivity selection on the front
Lamp Internal lamp powered from the supply
Scale type (centre-zero or left-zero) and supply rating Confirm at enquiry

Applications

  • Electromagnetic induction demonstrations with a magnet and coil
  • Showing the small current from a thermocouple when one junction is warmed
  • Detecting the null point in bridge and potentiometer circuits
  • Displaying photocell or solar cell currents in low light

Care & Handling

  • Always start on the least sensitive setting and increase it gradually to avoid driving the spot hard off the scale.
  • Use the transport or short-circuit setting, where provided, before carrying the instrument.
  • Place it on a steady bench away from strong magnets that could disturb the movement.
  • Disconnect the supply before cleaning, and do not open the case, which contains the lamp circuit.

Why Choose LabEquip

Physics teachers who demonstrate induction and other small-current effects to a whole room are the usual buyers of the Edspot galvanometer, since students at the back can see the spot. LabEquip offers it within its physics lab equipment range, and the scale version and supply details can be confirmed through our contact page.

Frequently Asked Questions

Why is a light spot more sensitive than a pointer?

The moving system carries only a small mirror, which is far lighter than a pointer, and the reflected beam turns through twice the angle of the mirror. Both effects make a tiny current produce a large, visible movement of the spot.

Is this galvanometer suitable for students to use themselves?

It is usually kept for teacher demonstrations because it is a delicate, mains-lit instrument. Students normally use milliammeters or pointer galvanometers in their own circuits.

What does the sensitivity control do?

It sets how much current is needed for a given movement of the spot. Start on the least sensitive position so an unexpected current cannot drive the spot hard against the end of the scale, then increase sensitivity as needed.

Can it show which way the current flows?

Yes, the spot moves in opposite directions for opposite currents. A centre-zero scale shows this most clearly because the spot can swing either side of the middle.

Can it measure the current in amperes?

It is primarily a detector and indicator. If the sensitivity of each setting is known, a deflection can be converted into a current, but for routine current measurements an ammeter is simpler.

Why does the spot move only while the magnet is moving?

An emf is induced only while the magnetic flux through the coil is changing. When the magnet stops, the flux is constant, no current flows and the spot returns to zero.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)