Search

In Stock

Fresnel’s Bi-Prism

Ultra-Low Refracting Angle: Engineered with an acute obtuse angle approaching 180° and two symmetrical refracting angles of approximately 30 arcminutes, ensuring the generation of overlapping coherent wavefronts with minimal beam deviation.

Optical-Grade Crown Glass: Manufactured from high-purity, low-dispersion crown glass featuring diamond-polished surfaces to provide maximum spectral transmission and superior fringe contrast during sensitive interferometry procedures.

$2.92

Quick Answer: The Fresnel’s Bi-Prism is a thin prism with one very obtuse angle, equivalent to two prisms of very small angle joined base to base, used to split light from a single narrow slit into two coherent beams that interfere. On an optical bench, Fresnel’s biprism produces interference fringes from which the wavelength of light is calculated.

How the Biprism Creates Two Coherent Sources

Interference needs two sources that keep a fixed phase relationship, which two separate lamps cannot provide. Augustin Fresnel’s answer was to divide a single wavefront. Light from a narrow illuminated slit falls on the biprism, and each half of the prism bends its part of the beam slightly towards the other. Seen from beyond the prism, the light appears to come from two virtual images of the slit, a small distance d apart, and because both come from the same original wavefront they are coherent.

Where the two beams overlap, bright and dark fringes form parallel to the slit. The fringe width β, measured with a micrometer eyepiece, is related to the wavelength by λ = βd/D, where D is the distance from the slit to the eyepiece. Since d cannot be measured directly, a convex lens is placed between the biprism and the eyepiece and moved to the two positions that give sharp images of the virtual sources, with separations d1 and d2. Then d = √(d1d2).

Good fringes depend on careful alignment: the slit, the edge of the biprism and the eyepiece cross-wire must be parallel and at the same height, and the slit must be narrow. A monochromatic source, traditionally a sodium lamp, gives many clear fringes; white light gives only a few coloured ones around a central white fringe.

Experiments

  • Determining the wavelength of sodium light from the fringe width
  • Finding the separation of the virtual sources by the displacement method with a convex lens
  • Measuring the thickness of a thin transparent sheet from the shift of the central fringe
  • Locating the central fringe with white light before switching to a monochromatic source

Specifications

Type Fresnel’s biprism
Function Divides one wavefront into two coherent beams
Mounting Optical bench, with slit and micrometer eyepiece
Key relation λ = βd/D
Prism dimensions, angle and holder Confirm at enquiry

Care & Handling

  • Handle the biprism by its edges or holder; fingerprints on the faces reduce fringe contrast.
  • Clean with lens tissue and a drop of lens cleaning fluid, wiping gently in one direction.
  • Protect the apex edge, the part that does the work, from knocks and chips.
  • Let the sodium lamp warm up fully and keep its housing well ventilated.

Why Choose LabEquip

University and college physics laboratories buy Fresnel’s biprism for the undergraduate interference practical, normally as one part of an optical bench set-up. LabEquip lists it in Physics Equipments together with lenses such as the double convex lens needed for the displacement method; for holders and accessories, reach our team through the contact page.

Frequently Asked Questions

Why are two separate lamps not used to produce interference?

Separate lamps emit light with random, rapidly changing phases, so any fringes shift too fast to see. The biprism divides one wavefront from a single slit, giving two coherent virtual sources with a fixed phase difference.

How is the wavelength calculated in the biprism experiment?

Measure the fringe width β with the micrometer eyepiece, the distance D from slit to eyepiece and the source separation d by the displacement method. Then λ = βd/D.

Why is a convex lens needed?

The two virtual sources cannot be measured directly. A convex lens placed between biprism and eyepiece gives sharp images of them in two positions, and their separations d1 and d2 give d = √(d1d2).

Why are no fringes visible?

Usually the slit is too wide, or the slit and the biprism edge are not parallel. Narrow the slit, rotate the biprism slowly until fringes appear, and check that slit, prism and eyepiece are at the same height.

What is the difference between Fresnel’s biprism and Young’s double slit?

Both produce interference from two coherent sources. Young’s method divides the wavefront with two narrow slits, which let through little light; the biprism uses refraction, so its fringes are generally brighter.

Can white light be used?

Yes, but only a few coloured fringes appear on either side of a central white fringe, because each wavelength gives a different fringe width. White light helps to find the central fringe, while sodium light is used for measurement.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)