Search

In Stock

Foxy Stepped Pulley Accessory for Mechanic’s Bench

Accessoire poulie étagée Foxy pour banc de mécanique. Features four discrete grooves with factory-calibrated radii for controlled mechanical advantage and gear ratio simulations.

Low-Friction Bearings Integrated high-performance ball bearings and a stainless steel axle mount designed to minimize parasitic drag during high-cadence kinematics trials.

₹1,560.00

Quick Answer: This stepped pulley is an accessory for a mechanics bench, listed under the Foxy name: pulley wheels of different radii fixed together on one axle, so that strings wound on different steps act at different distances from the axis. It is used for experiments on moments, the wheel and axle, and torque.

Balancing Moments on Different Steps

Because all the steps turn together, a stepped pulley is a wheel and axle with a choice of radii. A load hung by a string from a small step and an effort hung from a large step balance when the moments about the axle are equal: effort × large radius = load × small radius. Students change the masses or move a string to another step and check that the products stay equal, which is the principle of moments in rotating form.

The same arrangement shows the trade-off behind every simple machine. The effort on the larger step is smaller than the load, but when the pulley turns, the effort string moves further than the load string, in the ratio of the radii. Measuring both distances with a ruler shows that, apart from friction, the work put in equals the work got out.

Specifications

Item Stepped pulley accessory for a mechanics bench (Foxy, as listed)
Form Pulley wheels of different radii on a common axle
Principle Moments and torque at different radii
Used with Strings, mass hangers, slotted masses, spring balances
Number of steps, radii and fixing Confirm at enquiry

Torque and Angular Acceleration

Used with a falling mass, the accessory becomes an introduction to rotational dynamics. A mass hung from a string wound on one step accelerates the pulley; winding the same string on a larger step applies a larger torque with the same weight, and the pulley speeds up faster. Timing the fall over a measured height, or following the motion with a light gate or rotary sensor, gives the angular acceleration for each radius.

Comparing results across steps separates two ideas students often confuse: force and torque. The same force produces different turning effects depending on where it acts, which is why a door handle sits far from the hinges. Mounting the pulley on the bench keeps its axle fixed and level, so the readings depend on the radius chosen and not on how the apparatus is held.

Experiments on the Bench

  • Verifying the principle of moments on a wheel and axle
  • Measuring mechanical advantage and velocity ratio
  • Comparing angular acceleration for the same weight at different radii
  • Introducing torque before rotational dynamics

Care & Handling

  • Wind each string neatly in the groove of one step so it cannot ride onto a neighbouring step
  • Keep the axle bearing clean and free of grit, which adds friction
  • Do not hang loads heavier than the bench and accessory are intended to carry
  • Catch falling masses on a soft pad rather than letting them hit the floor

Why Choose LabEquip

Schools and colleges that already run the Foxy mechanics bench add this accessory to extend it from linear forces to rotation. LabEquip also lists a fixed single pulley with bench hook and other mechanics lab equipment; confirm the bench fitting through LabEquip contact.

Frequently Asked Questions

What is a stepped pulley used for?

It provides several radii on one axle, so the same apparatus can show the principle of moments, the wheel and axle as a simple machine, and the effect of radius on torque.

How do I calculate the mechanical advantage?

For an ideal pulley of this kind used as a wheel and axle, the mechanical advantage equals the large radius divided by the small radius. Friction makes the measured value a little lower.

Why does the effort string move further than the load string?

Both steps turn through the same angle, and the length of string paid out equals the angle multiplied by the radius. The larger step therefore pays out more string.

Does the pulley fit other mechanics benches?

It is listed as an accessory for the Foxy mechanics bench. Fitting another bench depends on the mounting, so tell us which bench you use and we will check.

How can I show torque with this pulley?

Hang the same mass from strings wound on different steps and time the fall. The larger step gives a larger torque and a faster angular acceleration.

Why must each string stay on one step?

A string that slips onto a neighbouring step changes the radius it acts at, which changes the moment and spoils the reading.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)