Search

In Stock

Floating Ring Magnet Apparatus

High-Remanence Ceramic Ferrite Rings: Equipped with anisotropic magnets designed to maintain consistent flux density, ensuring stable levitation and superior resistance to demagnetization over extended institutional usage cycles.

Low-Friction Vertical Guide Assembly: Features a precision-calibrated, non-magnetic pillar mounted on a high-stability base, engineered to minimize mechanical resistance and ensure purely magnetic interaction during displacement demonstrations.

$2.76

Quick Answer: The Floating Ring Magnet Apparatus holds several ring magnets on a vertical guide rod, arranged so that facing surfaces carry the same pole and the upper rings hover above the lower ones. The floating ring magnet apparatus shows that magnetic repulsion acts across empty space and lets students investigate how the force depends on the gap.

Equilibrium on a Rod

Each floating ring settles where the upward push of the ring below exactly balances the downward weight of that ring plus everything resting on it. The lowest gap carries the weight of every ring above it, so it is the narrowest, and the gaps widen up the stack. Adding a small mass to the top ring narrows every gap a little, which shows directly that a larger force requires the magnets to be closer.

The rod is essential. A magnet held up only by the repulsion of other permanent magnets cannot stay balanced in every direction at once (Earnshaw’s theorem), so without a guide the floating ring would flip over or slide off sideways and snap onto its neighbour. The rod prevents those sideways and turning movements while leaving the ring free to move up and down.

What Students Can Investigate

  • Showing that like poles repel and that the force acts across an air gap
  • Measuring how the gap changes as small masses are added to the top ring
  • Plotting repulsive force against separation from those measurements
  • Timing the up-and-down oscillation of a ring pushed down and released
  • Turning one ring over to show attraction snapping two rings together

A Magnetic Spring

Push the top ring down gently and release it, and it bounces up and down before settling. The magnetic repulsion acts like a spring whose stiffness increases as the gap shrinks, so the oscillation is a useful example of a restoring force. Friction on the rod and induced effects damp the motion, and students can time the oscillation and compare it with a mass on a spring.

Rings for this apparatus are typically ferrite, the same material as LabEquip’s ferrite ring magnets. The floating magnet demonstrator offers a similar demonstration in another format.

Specifications

Type Magnetic levitation demonstration
Arrangement Ring magnets on an upright non-magnetic rod, like poles facing
Principle Repulsion between like poles balances weight
Ring material Typically ceramic ferrite
Number of rings, base and rod material Confirm at enquiry

Care & Handling

  • Remove the rings singly, from the top down, holding them by the edges rather than reaching between them.
  • Store the rings in attracting pairs with card spacers, away from the rod.
  • Avoid letting rings slam together; ferrite chips easily.
  • Keep the rod clean and dry so that rings slide freely.

Why Choose LabEquip

Primary and secondary schools buy the floating ring magnet apparatus as a striking introduction to magnetic repulsion that also supports simple quantitative work. It is listed in LabEquip’s physics equipment category, and requests for spare rings or several sets can be sent through the contact page.

Frequently Asked Questions

How can this apparatus show that magnetic force depends on distance?

Place small known masses on the top ring one at a time and measure the gap below it each time. The gap shrinks as the load grows, showing that a larger repulsive force needs a smaller separation; a graph of load against gap shows the relationship.

Why do the floating rings need a central rod?

Without a guide, a magnet supported only by repulsion from other permanent magnets cannot be stable in every direction; this is Earnshaw’s theorem. The rod stops the ring tipping or sliding sideways, leaving only vertical movement.

Why does a ring bounce when it is pushed down and released?

Pushing the ring down narrows the gap and increases the repulsion, which then pushes the ring back up past its resting point. The ring oscillates like a mass on a spring until friction stops it.

What does reversing a single ring on the rod show?

Its face nearest the next ring then has the opposite pole, so the two rings attract and snap together instead of floating. Turning it back restores the floating arrangement.

Which ring has the smallest gap beneath it?

The lowest floating ring. It supports the weight of every ring above it as well as its own, so the repulsion beneath it must be largest and the gap correspondingly smallest.

Can extra rings be added to the apparatus?

Yes, if they are of a size that fits the rod. Each extra ring adds weight to the stack, and the lower gaps become narrower; the rod height limits how many can float.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)