Search

In Stock

Ferrite Rings

High-Coercivity Sintered Ferrite: Fabricated from premium strontium/barium ceramic compounds, these rings exhibit exceptional resistance to external demagnetization and maintain stable magnetic flux density under varying laboratory thermal conditions.

Standardized Toroidal Dimensions: Engineered with uniform geometric tolerances and smooth surface finishes to ensure consistent results during experiments involving the wrapping of coils for transformer theory and magnetic core saturation demonstrations.

₹175.00

Quick Answer: Ferrite Rings are ring-shaped ceramic ferrite magnets with a central hole, usually magnetised so that the two flat faces are the poles. Ferrite ring magnets can be threaded on a rod or bolt, which makes them ideal for levitation demonstrations, loudspeaker models and experiments on magnetic repulsion.

What a Ferrite Ring Magnet Is

Ferrite magnets are made by pressing and firing a mixture of iron oxide with barium or strontium compounds, producing a hard, dark grey ceramic. Ferrite does not rust, does not conduct electricity and resists demagnetisation, so ring magnets of this material survive classroom use without keepers or protective coatings.

The hole through the middle is what sets rings apart from discs. Several rings threaded on a vertical wooden or plastic rod with like faces towards each other push apart and hover, as in the floating ring magnet apparatus. The same shape is used in loudspeakers, where the ring surrounds the voice coil, so a ring magnet from the laboratory helps students see how a speaker works.

Classroom Uses for Ring Magnets

  • Magnetic levitation of rings on a vertical rod with like poles facing
  • Building a simple loudspeaker model with a coil and paper cone
  • Investigating how repulsion changes with the distance between two rings
  • Comparing hard and soft magnetic materials alongside a soft iron core

Specifications

Type Ring-shaped permanent magnets
Material Ceramic ferrite
Poles Usually on the two flat faces
Feature Central hole for threading on a rod or bolt
Diameter, thickness and pack quantity Confirm at enquiry

Ring Magnets and Ferrite Cores

The word ferrite also describes soft ferrite cores, the toroidal rings wound with wire in transformers and filters. These look similar but are not permanent magnets: they become magnetised only while a current flows in their winding. A quick test with a paper clip tells the two apart, since a ring magnet holds the clip and a soft ferrite core does not.

Physics teachers can use that contrast to explain hard and soft magnetic materials. On this page, ferrite rings means the permanent ring magnets used in magnet experiments, listed alongside LabEquip’s other magnets.

Care & Handling

  • Avoid letting rings snap together; ferrite is brittle and chips at the edges.
  • Store rings stacked in attracting pairs with a card spacer between them.
  • Keep them dry and clean, although ferrite itself does not rust.
  • Keep them away from phones, bank cards, watches and medical implants.

Why Choose LabEquip

Schools and colleges buy ferrite ring magnets for levitation demonstrations, speaker-building projects and general magnetism work, often in packs for group activities. LabEquip lists them in its physics equipment category with other ferrite and neodymium shapes; quantities can be agreed through the contact page.

Frequently Asked Questions

Where are the poles on a ferrite ring magnet?

Most ring magnets are magnetised through their thickness, so one flat face is north and the other south. Hold a compass to each face to check, and mark the north face with a small dot of paint for class use.

How do ferrite rings float on a rod?

Thread two or more rings on a vertical non-magnetic rod with like faces towards each other. Each ring is pushed up by the repulsion of the one below until that force balances its weight, so it hovers with an air gap.

What is the difference between a ferrite ring magnet and a ferrite core?

A ferrite ring magnet is a permanent magnet made of hard ferrite. A ferrite core is made of soft ferrite and is magnetised only while current flows in a coil wound on it. A paper clip test distinguishes them.

Can ferrite rings be used to build a loudspeaker?

Yes. Glue a ring to a base, wind a small coil of thin enamelled wire round a paper tube that fits loosely in the ring, attach a paper cone and connect the coil to an audio source. The coil moves in the magnet field and the cone produces sound.

Do ferrite rings lose their magnetism?

Very slowly, if at all, under classroom conditions. Ferrite resists demagnetisation well, so it needs no keeper. Physical damage such as chipping is the more common problem.

Do ferrite ring magnets conduct electricity?

No. Ferrite is a ceramic and an electrical insulator, so a ring magnet cannot form part of a circuit. This also means eddy currents are not induced in it.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)