Search

In Stock

FIXED CAPACITANCE CAPACITOR BOARD

Multiple fixed-value capacitors are mounted on a single board for comparative and combination experiments

Clearly labeled terminals with insulated connections ensure safe, accurate circuit assembly

Quick Answer: The Fixed Capacitance Capacitor Board is a board carrying fixed-value capacitors, each wired to terminals, so that students can connect known capacitances into circuits without handling loose components. A capacitor board is used in physics practicals on charging and discharging, time constants and combinations of capacitors.

What a Capacitor Does

A capacitor stores charge on two conducting plates separated by an insulator. When it is connected to a supply through a resistor, current flows at first and then dies away as the plates charge up, until the voltage across the capacitor equals the supply voltage. The charge stored is Q = CV, where C is the capacitance, and the energy stored is ½CV². Discharging through a resistor reverses the process, with the current and voltage both falling away exponentially.

Mounting the capacitors on a board with terminals saves time, protects the leads from being bent off and makes it clear which value is being used. Unlike a decade box, where a switch selects the value, each capacitor here has a fixed value and its own terminals, so combinations are made with connecting leads, which helps students see the circuit they are building. The values on this board, and whether any are electrolytic, should be confirmed when ordering.

Time Constants and Combinations

The time constant of a resistor-capacitor circuit is RC: the time for the voltage on a discharging capacitor to fall to about 37 percent of its starting value. Measuring the voltage at regular intervals with a voltmeter and stopwatch, and plotting the natural logarithm of voltage against time, gives a straight line whose gradient is −1/RC. Repeating with different capacitors on the board shows the time constant growing in proportion to C.

Connecting two capacitors in parallel adds their capacitances, because the plate area is effectively increased. In series, the reciprocals add, so the total is less than either one. Charging a combination and measuring the time constant is a direct experimental check of both rules.

Specifications

Type Board of fixed-value capacitors with terminals
Topics Charging and discharging, time constant, series and parallel combinations
Used with Resistors, DC supply, voltmeter or data logger, stopwatch, switch
Level Senior school and college physics
Capacitance values, type and voltage rating Confirm at enquiry

Practicals

  • Charging and discharging curves and measurement of the RC time constant
  • Verifying the rules for capacitors in series and in parallel
  • Calculating energy stored and comparing it with energy dissipated in a resistor
  • Showing how a capacitor blocks steady direct current but passes changing current; resistors from the fixed electrical resistors set complete the RC circuit

Care & Handling

  • Discharge the capacitor board through a resistor before handling terminals or changing connections.
  • Observe the polarity markings on any electrolytic capacitor and never exceed the marked voltage rating.
  • Use a low-voltage DC supply and a series resistor to limit charging current.
  • Store the board dry and flat, and keep metal objects off the terminals.

Why Choose LabEquip

College and senior school physics departments buy capacitor boards so that groups can run capacitor practicals with reliable, clearly marked components. LabEquip lists this board in its physics lab equipment range; the decade capacitance box suits work where values must be changed in steps. Ask about the capacitance values and ratings through our contact page.

Frequently Asked Questions

How is a fixed capacitor board different from a decade capacitance box?

A decade box selects values with switches inside a closed case. A fixed board has separate capacitors, each with its own terminals, so combinations are made with leads and students can see exactly how the circuit is connected.

How is the time constant measured?

Charge the capacitor, then let it discharge through a known resistor while reading the voltage at regular times. The time for the voltage to fall to about 37 percent of its starting value equals the time constant, resistance multiplied by capacitance.

What happens when capacitors are connected in series and in parallel?

In parallel, capacitances add directly, so the total is larger. In series, the reciprocals add, so the total is smaller than the smallest capacitor. Both rules can be checked by measuring time constants.

Do the capacitors have a polarity?

Electrolytic capacitors do: the positive terminal must go to the positive side of the supply, or the capacitor can be damaged. Other types, such as ceramic or film capacitors, can be connected either way. Check the markings on the board.

Why must a capacitor be discharged before handling?

A capacitor can hold its charge after the supply is removed. Touching the terminals could give a shock or a spark, so it is discharged through a resistor first.

How much energy does a capacitor store?

Half the capacitance multiplied by the square of the voltage. Doubling the voltage therefore stores four times as much energy, which is why the voltage rating must never be exceeded.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)