Quick Answer: The Zeeman effect experiment shows a single spectral line from a gas discharge lamp splitting into several closely spaced lines when the lamp is placed in a strong magnetic field. Measuring the splitting against the field strength links atomic spectra to the magnetic moment of the electron.
Why the Line Splits
An atom’s energy depends slightly on how its magnetic moment is oriented relative to an external field. In a magnetic field each level with angular momentum divides into sublevels separated by an energy proportional to the field, ΔE = μB·B in the simplest case, where μB is the Bohr magneton. Transitions between the sublevels of the upper and lower levels give several lines in place of one.
In the normal Zeeman effect, seen for transitions between singlet states, the line splits into three components when viewed across the field. Most lines show the anomalous Zeeman effect with more components, because electron spin contributes to the magnetic moment differently from orbital motion. Classically the red line of cadmium is used for the normal effect, since its pattern is simple to interpret.
Observing a Very Small Splitting
The wavelength shift is tiny, far smaller than an ordinary grating spectrometer can resolve, so the light is analysed with a high-resolution interference device such as a Fabry-Pérot etalon, which produces a set of sharp rings. Each ring splits as the magnet current is increased, and the change in ring diameter gives the energy shift.
Viewing across the field (transverse) and along it (longitudinal) reveals different components with distinct polarisations. Across the field the central line is polarised parallel to the field and the outer pair perpendicular to it; along the field only the outer pair appears, as circularly polarised light. A polariser in the viewing path lets students separate them.
Applications in Teaching
- Advanced undergraduate atomic physics practicals
- Determining the Bohr magneton from the line splitting against field
- Comparing normal and anomalous Zeeman patterns
- Studying the polarisation of Zeeman components in transverse and longitudinal views
Specifications
| Experiment | Zeeman effect: splitting of spectral lines in a magnetic field |
| Measured quantity | Energy shift of line components against magnetic field |
| Result | Bohr magneton, or the specific charge of the electron |
| Typical setup | Spectral lamp between electromagnet poles, high-resolution etalon, polariser and viewing optics or camera |
| Lamp type, magnet and supplied components | Confirm at enquiry |
Care & Handling
- Ramp the electromagnet current up and down slowly and never disconnect it while energised
- Keep watches, cards and steel tools away from the magnet pole gap
- Let the spectral lamp cool before moving it, and do not touch its glass with bare fingers
- Keep the etalon in its housing and protect its coated surfaces from dust and fingerprints
Why Choose LabEquip
The Zeeman effect experiment is usually bought by universities building an advanced atomic physics laboratory, where it complements the Franck-Hertz experiment and the Balmer series measurement. Contact LabEquip to confirm which lamp, magnet and optics are included.
Frequently Asked Questions
What is the difference between the normal and anomalous Zeeman effect?
In the normal effect a line splits into three equally spaced components, because only orbital angular momentum is involved. In the anomalous effect electron spin also contributes, so the line splits into more components with unequal spacing.
Why is a Fabry-Pérot etalon used instead of a grating?
The Zeeman splitting is only a tiny fraction of the wavelength. An etalon produces sharp interference rings with very high resolving power, so the small change in ring position can be measured.
How is the Bohr magneton found?
The energy shift of the outer components is measured for several values of the magnetic field. Plotting the shift against the field gives a straight line whose gradient equals the Bohr magneton for the normal effect.
Why does the view along the field show only two components?
The central component is polarised parallel to the field and does not radiate along the field direction. Looking along the field, only the two outer components appear, and they are circularly polarised in opposite senses.
How is the magnetic field measured?
Usually with a teslameter probe placed in the pole gap and recorded against the magnet current before the lamp is inserted. That calibration then converts each current setting to a field value.
What safety points apply to the electromagnet?
Large electromagnets store energy, so the current should be reduced to zero before switching off or changing connections. Keep magnetic objects, and anyone with a pacemaker, away from the energised pole gap.
Last Updated: October 2026










Reviews
There are no reviews yet.