Search

In Stock

Engine on Stand

Moteur sur support Features a boîtier transparent et robuste (robust transparent housing) integrated with high-contrast sérigraphie (screen printing) to facilitate student comprehension of commutation and rotor-stator interaction while maintaining structural integrity during high-velocity rotation.

Industrial-Grade Safety Interface Engineered with douilles sécurisées Ø4 mm (4mm safety shrouded sockets) for low-resistance electrical connectivity, ensuring systemic operator protection and stable signal input for high-fidelity measurement of back-EMF and mechanical efficiency.

₹650.00

Quick Answer: This electric motor on stand is a small motor mounted in a protective module with a clear cover, two sockets on the side and a propeller on its shaft, as pictured. Connected to a low-voltage supply, it turns electrical energy into rotation, showing students the motor effect in a form they can see and hear.

How the Motor Turns

Small classroom motors of this kind are normally permanent-magnet DC motors: a coil, or armature, sits between the poles of permanent magnets. When current flows in the coil, each side of it lies in the magnetic field and feels a force, F = BIL, in opposite directions on the two sides, and the pair of forces produces a turning effect. A commutator, a split ring with brushes, reverses the current in the coil every half turn so that the turning effect always acts the same way and the shaft keeps spinning.

Reversing the connections to the sockets reverses the current and so the direction of rotation, which students can see from the propeller. Raising the supply voltage, within the motor’s rating, makes it spin faster.

Back EMF and the Motor as a Generator

An ammeter in series reveals something less obvious. The current is largest at the instant the motor starts and falls as it speeds up. A spinning coil in a magnetic field generates its own emf, opposing the supply, so the faster the motor runs, the less current it draws. Lightly loading the propeller slows the motor and the current rises again.

The same machine can work in reverse as a generator. Disconnect the supply, connect a sensitive voltmeter or galvanometer to the sockets and spin the propeller briskly by hand or in a stream of air: a small voltage appears. This makes the module useful in energy-conversion and wind-power lessons.

Lessons and Practicals

  • Demonstrating the motor effect and the conversion of electrical energy to kinetic energy
  • Showing that reversing the current reverses the direction of rotation
  • Measuring how motor current changes from start-up to full speed and under load
  • Using the motor as a simple generator in wind-energy and energy-conversion activities

Specifications

Type Small electric motor in a protective module
Load fitted Propeller on the motor shaft, as pictured
Connections Two sockets on the side of the module, as pictured
Supply Low-voltage laboratory supply or cells
Rated voltage and current Confirm at enquiry

Care & Handling

  • Keep fingers, hair and loose leads away from the propeller when the motor is running.
  • Use a supply within the motor’s rated voltage; overvoltage overheats the windings and wears the brushes.
  • Do not hold the propeller still for long while power is applied, as a stalled motor draws a high current.
  • Keep the module dry and store it so the propeller cannot be bent.

Why Choose LabEquip

Motor modules like this are bought as class sets for electricity and energy topics, where each group needs a safe, ready-wired motor. LabEquip supplies it alongside switching modules such as the toggle switch on bracket in its Physics Equipments category; send quantities through the contact page.

Frequently Asked Questions

Why does the motor change direction when the leads are swapped?

Swapping the leads reverses the current in the coil. The force on each side of the coil depends on the current direction, so the turning effect, and the direction of spin, reverses too.

Why is the current highest when the motor starts?

At rest the coil generates no back emf, so only the coil’s resistance limits the current. As the motor speeds up, the emf it generates opposes the supply and the current falls.

Can the motor be used as a generator?

Yes. Spinning the shaft moves the coil through the magnetic field, generating a small voltage at the sockets. A sensitive voltmeter or galvanometer will show it, and the faster the spin, the larger the reading.

What supply voltage should be used?

Use a low-voltage DC supply or cells within the motor’s rating. Start low and increase gradually, and check the rated voltage of the module before connecting a higher-voltage supply.

Is the propeller safe for students?

The propeller is light, but at full speed it can still nip fingers and catch hair. Keep hands clear while it turns and switch off before touching it.

Why does the motor slow down when the propeller is loaded?

Loading the shaft takes energy from the motor, so it slows. Its back emf then falls and the current rises, which is why a stalled or heavily loaded motor draws much more current and gets warm.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)