Quick Answer: The Electricity Exploration Board is a teaching board on which components such as lamps, switches and connection points are mounted so that students can build and compare simple electric circuits. Science teachers use the electricity exploration board to investigate series and parallel circuits and to show how the wiring in a home is arranged.
What Students Explore on the Board
With components fixed in place, students spend their time on the circuit rather than on loose connections. They can light one lamp, then two in series and see both glow dimly, then two in parallel and see each glow as brightly as one alone. Removing a lamp from each arrangement shows why a series string goes dark while parallel branches carry on. Adding a switch in different positions shows which lamps it controls.
Boards of this kind often also carry fittings that echo household wiring, such as a two-way switch arrangement or a fuse holder, so the step from classroom circuits to the wiring in a house is easy to make. The exact components on this board should be confirmed when ordering; compared with loose electricity experiment kits for schools, a fixed board is quicker to set up but less open-ended.
From the Board to the Wiring in a Home
Homes are wired in parallel so that every appliance receives the full supply voltage and can be switched on and off independently. The switch for each light sits in the live wire, so that when it is off the lamp holder is disconnected from the live supply. Two-way switches at the top and bottom of a staircase let one light be controlled from either end. A fuse or circuit breaker in the live wire cuts the current if it becomes dangerously large. All of these ideas can be modelled safely at low voltage on the board before students meet them in real installations.
Activities
- Comparing lamp brightness in series and in parallel
- Investigating where to place a switch to control one lamp or all lamps
- Modelling staircase (two-way) switching and the role of a fuse
- Testing which materials conduct by placing them in a gap in the circuit
Specifications
| Type | Circuit board with mounted components for school electricity lessons |
| Topics | Series and parallel circuits, switches, household wiring principles |
| Typical components | Lamp holders, switches, terminals or connection points |
| Supply | Low-voltage cells or a low-voltage bench supply |
| Exact components and layout | Confirm at enquiry |
Care & Handling
- Use the electricity exploration board only with low-voltage cells or a low-voltage supply, never with mains electricity.
- Switch off before changing connections or replacing a lamp.
- Replace lamps with the same type and rating so brightness comparisons stay fair.
- Store the board flat and dry, with leads coiled loosely so terminals are not strained.
Why Choose LabEquip
Primary and lower secondary schools buy circuit boards in class sets so that each group can work on the same circuits at the same time. LabEquip lists this board in its physics lab equipment range; the senior circuit board suits older students moving on to more advanced circuits. Ask about the components fitted through the LabEquip contact page.
Frequently Asked Questions
What can students learn from the board?
How current flows in a complete circuit, the difference between series and parallel connections, how switches control lamps, and the principles behind household wiring, such as parallel connection and fuses.
Why are lamps in a house connected in parallel?
Each lamp then receives the full supply voltage and can be switched independently. If one lamp fails, the others stay on, which would not happen if they were connected in series.
How does a two-way switch control a lamp from two places?
Two changeover switches are linked by two wires. Changing either switch completes or breaks the circuit, so the lamp can be turned on at one end of a staircase and off at the other.
Why is the switch placed in the live wire?
When the switch is off, the lamp holder is then cut off from the live supply. If the switch were in the neutral wire, the holder would stay live and could give a shock even with the lamp off.
What power source should be used?
Low-voltage cells in a holder or a low-voltage bench supply. The board is for safe exploration of circuit principles and must never be connected to mains electricity.
How does the board differ from building circuits with loose components?
Fixed components make set-up quick and connections reliable, so lessons focus on results. Loose components give more freedom to design new circuits, so many schools use both.
Last Updated: October 2026










Reviews
There are no reviews yet.