Search

In Stock

Electrician’s knife

Insulated ergonomic handle for secure grip and protection against accidental electric contact

High-carbon steel blade offering sharp, durable cutting performance for various wire gauges

$3.21

Quick Answer: The Electrician’s Knife is a hand tool with a strong, short blade used to cut and strip the insulation from electrical wires and cables. In physics laboratories and electrical workshops an electrician’s knife is used to prepare connecting leads, trim cable sheaths and scrape enamel from coil wire before connections are made.

Stripping Insulation Without Damaging the Conductor

The skill in using the knife is to remove insulation without nicking the copper underneath. For a single-core wire, the blade is held at a shallow angle, like sharpening a pencil, and the insulation is pared away from the end in thin strips, always cutting away from the body. Larger cables are first slit along the outer sheath with the blade almost flat, and the inner cores are then stripped individually. A cut made straight down around the wire, by contrast, can score the copper all the way round.

A nicked conductor has a smaller cross-section at that point. It is weaker and breaks more easily when bent, and in a working circuit the narrow spot heats up. Any wire that has been nicked should be cut back and stripped again.

Uses Specific to a Physics Lab

Coil-winding practicals, electromagnets, motors and transformers often use enamelled copper wire, whose thin varnish insulation must be removed before the wire will make contact. Scraping the last few millimetres with the back or edge of the blade until bright copper shows is a quick way to do this. The knife is also handy for trimming connecting leads to length and cutting insulating sleeving. The blade style of this knife (fixed or folding, plain or with extra tools) should be confirmed when ordering.

Typical Tasks

  • Stripping the ends of connecting wires for circuits and experiments
  • Scraping enamel from copper wire when winding coils, electromagnets and motors
  • Slitting outer sheaths of multicore cable in electrical workshop training
  • Trimming insulating sleeving and tape during repairs to laboratory apparatus

Care & Handling

  • Always cut away from your body and hands, and keep the other hand behind the blade.
  • Never use the electrician’s knife on a cable that is connected to a supply; isolate the circuit first.
  • Close or sheath the blade immediately after use, and store the knife where students cannot pick it up unsupervised.
  • Keep the blade sharp with a fine stone; a blunt blade needs more force and is more likely to slip.

Specifications

Type Hand knife for cutting and stripping electrical insulation
Main use Preparing wires and cables for connection
Lab uses Connecting leads, enamelled coil wire, sleeving
Users Laboratory technicians, electrical trainees, supervised students
Blade style, handle and folding or fixed type Confirm at enquiry

Why Choose LabEquip

Laboratory technicians and electrical training workshops keep a few of these knives for preparing wires and repairing apparatus. LabEquip lists the knife in its physics lab equipment range; for students, a wire stripper and cutter is a safer choice for routine stripping. Ask about blade style and handle through our contact page.

Frequently Asked Questions

How do I strip insulation without damaging the wire?

Hold the blade at a shallow angle and pare the insulation away towards the wire end, as if sharpening a pencil. Avoid cutting straight down around the wire, which can score the copper.

Why should nicked copper wire be cut back?

A nick reduces the cross-section of the conductor. The wire becomes weak at that point and can break when bent, and a current concentrated in the narrow section makes it heat up.

Can the knife remove enamel from coil wire?

Yes. Scrape the last few millimetres of enamelled wire with the blade, turning the wire, until bright copper shows all round. Fine abrasive paper does the same job when a blade is not wanted.

Is a knife or a wire stripper better for students?

A wire stripper is better for routine student work, because its jaws are set to cut only the insulation and the user’s fingers stay clear of an open blade. The knife suits technicians and larger cables.

Can the knife be used on live wires?

No. Always switch off and disconnect the supply first. An ordinary electrician’s knife is not designed or rated for work on live conductors, whatever its handle is made of.

How should the knife be stored?

With the blade closed or covered, in a dry drawer or tool roll away from student access. A light wipe of oil on the blade before storage prevents rust spots.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)