Quick Answer: The Electric Detector with Aluminum Foil is an aluminium foil electroscope: two thin aluminium foil leaves hang from a metal rod inside a protective case, and they spread apart when charge reaches them. Students use the aluminium foil electroscope to detect static charge, test materials and study charging by contact and by induction.
How the Foils Detect Charge
The detector has a metal cap or disc on top of a metal rod. The rod passes through an insulating stopper or bush into a jar or case, and at its lower end carries two light aluminium foil leaves. Any charge put on the cap spreads down the rod to the leaves. Both leaves then carry the same sign of charge, they repel each other, and they open into an inverted V. The more charge, the wider they spread.
The case is not just a holder. It keeps air currents away from the light foils, which would otherwise flutter, and it protects them from being torn. The exact construction of this detector, including whether the case is a glass jar or a framed box, should be confirmed when ordering.
Aluminium Foil Compared with Gold Leaf
Aluminium foil is thicker and stiffer than gold leaf, so it needs more charge to open the same amount, but it is much more robust and the leaves are easy to replace with strips cut from kitchen-grade foil. That makes the aluminium version a practical choice for group work, where many hands handle the instrument, while the more sensitive gold foil detector suits demonstrations of small charges.
Investigations
- Detecting the charge produced by rubbing polythene, acetate or glass rods
- Charging the electroscope by contact and by induction, and explaining the difference
- Testing whether materials conduct by touching the charged cap with them
- Showing that a flame near the cap discharges the electroscope by ionising the air
- Using elderberry pith balls alongside the electroscope to compare two ways of detecting charge
Care & Handling
- Keep the aluminium foil electroscope upright and do not shake it, which tangles or tears the leaves.
- Keep the insulating stopper clean and dry; a dusty or damp insulator lets charge leak away.
- Replace torn leaves with strips of fresh foil, handled with forceps so they stay flat and clean.
- Store it in a dry cupboard, covered, away from the sink area.
Specifications
| Type | Leaf electroscope (electric detector) with aluminium foil leaves |
| Principle | Like charges on the two leaves repel |
| Typical parts | Metal cap and rod, insulating stopper, foil leaves, protective case |
| Detects | Presence and relative amount of static charge; sign with a known charge |
| Case type and dimensions | Confirm at enquiry |
Why Choose LabEquip
Schools often buy several aluminium foil detectors so that every group can test charges at the same time. LabEquip lists this detector in its physics lab equipment range. For the case type and number required, ask through the LabEquip contact page.
Frequently Asked Questions
How does aluminium foil compare with gold leaf in an electroscope?
Aluminium foil is thicker and heavier, so the leaves open less for the same charge, but it is far tougher and easier to replace. Gold leaf is more sensitive and suits demonstrations of small charges.
How do I test whether a material is a conductor?
Charge the electroscope so the leaves are open, then touch the cap with the material while holding it in your hand. A conductor lets the charge flow away and the leaves collapse; an insulator leaves them open.
Why do the foils close when I touch the cap with a finger?
Your body is a conductor connected to the ground. Touching the cap earths the electroscope, the charge flows away through you, and the leaves fall together.
Why do the leaves open when a charged rod is only brought near?
The rod attracts opposite charge to the cap and repels like charge down to the leaves, so the leaves repel each other. This is induction, and the leaves fall again when the rod is taken away.
What is the jar or case around the leaves for?
It shields the very light foils from air currents and from being touched or torn. Without it, the leaves would move in any draught and readings would be impossible to interpret.
How are torn foil leaves replaced?
Cut two narrow strips of thin aluminium foil, smooth them flat and hang them over the hook or flattened end of the rod. Handle them with forceps, because creased or greasy leaves stick together.
Last Updated: October 2026










Reviews
There are no reviews yet.