Search

In Stock

E/m By Millikan’s Oil Drop Method

Illuminated observation chamber with precision viewing optics for accurate droplet tracking

Variable high-voltage control system allowing fine adjustment of electric fields during measurement

₹6,458.00

Quick Answer: The Millikan’s oil drop apparatus measures the charge on tiny oil droplets held or moved between two horizontal metal plates, showing that charge comes in whole multiples of the electron’s charge e. With e known, a value of e/m from another method gives the mass of the electron, which is why the experiment sits with the e/m set.

What the Experiment Measures

Robert Millikan’s experiment answered a question that e/m experiments cannot: how large is the charge on a single electron? Fine oil droplets are sprayed from an atomiser into a chamber above two parallel horizontal plates. Some droplets become charged by friction as they leave the nozzle. Through a small hole they drift into the space between the plates, where they are lit from the side and watched through a measuring microscope with a scale in the eyepiece, appearing as bright points against a dark background.

With the plates uncharged, a droplet falls slowly at a steady terminal velocity, where its weight is balanced by air resistance. Measuring that speed and applying Stokes’ law gives the droplet’s radius and therefore its mass. When a voltage is applied to the plates, the electric force on a charged droplet can be adjusted to hold it stationary or to drive it upwards, and from the voltage, the plate separation and the mass the charge on the droplet is calculated.

Two Ways of Taking Readings

In the balancing method, the voltage is adjusted until the chosen droplet hangs still, so the electric force qV/d equals its weight mg. The field is then switched off and the droplet’s fall time over a marked distance gives its mass. In the rising and falling method, the droplet is timed falling with no field and rising with the field on, and both speeds go into the calculation; this avoids having to judge an exact balance. In either method many droplets are measured, and the charges found cluster at whole-number multiples of about 1.6 × 10⁻¹⁹ coulombs, the elementary charge.

Specifications

Quantity determined Elementary charge e (with e/m, the electron mass)
Methods Balancing (static) and rising-falling (dynamic) drop methods
Main parts (typical) Parallel-plate chamber, atomiser, lamp, measuring microscope, variable DC supply
Level Undergraduate physics laboratories
Supplied parts, oil and power supply Confirm at enquiry

Practical Work

  • Measuring the charge on several droplets and showing that charge is quantised
  • Applying Stokes’ law and terminal velocity in an atomic physics practical; the viscosity measurement tube shows the same law with falling spheres
  • Combining e from this experiment with e/m to calculate the mass of the electron
  • Discussing experimental judgement, repeat measurements and uncertainty in a classic experiment

Care & Handling

  • The plates carry a high DC voltage; make connections with the supply off and keep the chamber cover in place.
  • Use only clean, non-volatile oil of the kind intended for the apparatus and keep the atomiser nozzle clear.
  • Wipe oil mist from the plates and the chamber windows after each session so droplets remain visible.
  • Level the chamber carefully before starting, and keep the lamp switched off when not observing to limit heating of the chamber air.

Why Choose LabEquip

College physics laboratories usually have one or two Millikan’s oil drop set-ups that groups use in turn, because each run needs patient observation. LabEquip lists this apparatus in its physics lab equipment range beside the electron-beam e/m methods, including the magnetic focusing method. Questions about the supplied parts can be sent through our contact page.

Frequently Asked Questions

Does the oil drop method measure e or e/m?

It measures the charge e directly, from the forces on charged droplets. The specific charge e/m comes from electron-beam experiments, and dividing e by e/m gives the mass of the electron.

How is the charge on a droplet found by the balancing method?

The voltage is adjusted until the droplet is stationary, so the electric force equals its weight. The charge is then the droplet’s weight multiplied by the plate separation, divided by the balancing voltage.

How is the mass of such a tiny droplet measured?

From its terminal velocity when falling with no field. Stokes’ law links that speed to the droplet’s radius and the viscosity of air, and the radius together with the oil’s density gives the mass.

Why is oil used instead of water?

Oil evaporates very slowly, so a droplet keeps the same mass for the several minutes needed to time it repeatedly. Water droplets would shrink as they were watched, spoiling the measurements.

Why do the measured charges come in steps?

Each droplet carries a whole number of extra or missing electrons. The measured charges therefore fall at multiples of one smallest value, the elementary charge, which is the central result of the experiment.

Why must the plates be exactly level?

The electric field must act straight up and down so that it opposes gravity directly. If the plates are tilted, droplets drift sideways out of the field of view and the balance condition no longer holds.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)