Search

In Stock

Digital Multimeter 2

High-Accuracy True RMS Measurement: Ensures precise readings for AC/DC voltage and current across varied circuit types.

Wide Measurement Range with Auto-Ranging: Simplifies testing across multiple parameters without manual adjustments.

₹435.00

Quick Answer: This Digital Multimeter is a hand-held meter that measures potential difference, current and resistance with one instrument and shows each reading as digits on a display. In circuit investigations a digital multimeter lets students check theory against measurement, from Kirchhoff’s laws to the internal resistance of a cell.

Investigations Built Around the Meter

Kirchhoff’s laws are easy to state and convincing to test. With two or three resistors in a series-parallel network, students measure the potential difference across each component and add them round every closed loop: the total equals the supply voltage, within the meter’s accuracy. Then, breaking the circuit at a junction to insert the meter in each branch in turn, they show that the currents flowing into the junction add up to the current flowing out.

Internal resistance is a second classic. A cell connected to a variable resistor gives a terminal voltage that falls as the current drawn increases. Plotting terminal voltage against current gives a straight line whose intercept is the emf and whose gradient is minus the internal resistance. Using two meters at once, one as a voltmeter and one as an ammeter, makes each reading a matched pair.

Practical Uses

  • Verifying Kirchhoff’s current and voltage laws on a resistor network
  • Finding the emf and internal resistance of a cell
  • Plotting I–V characteristics of a resistor, a filament lamp and a diode
  • Fault-finding in student circuits by checking continuity and voltage drops
  • Measuring the resistance of components and connecting leads before a practical

Reading the Display Sensibly

A digital display looks exact, but every reading carries an uncertainty, usually specified as a percentage of the reading plus a number of counts in the last digit. When the last digit flickers, the true value lies within that range, and students should record the steady value or the middle of the flicker rather than an extreme. On a manual-range meter, choosing the lowest range that does not overload gives the most digits; an overload is usually shown as OL or a single 1 at the left. The functions, ranges and accuracy of this particular model are not given in its title and should be checked before planning an experiment around them.

Specifications

Instrument Hand-held digital meter
Quantities measured Potential difference, current and resistance
Display Numerical digital readout
Connection Test leads into function sockets; in series for current, in parallel for voltage
Functions, ranges, accuracy and safety category Confirm at enquiry

Care & Handling

  • Before measuring voltage, check that the red lead is not still in the current socket; that connection shorts the source through the meter’s fuse.
  • Measure resistance only with the circuit switched off and any capacitors discharged.
  • Switch off after use to save the battery, and replace a weak battery promptly because a low supply can upset readings.
  • Use the meter only within its rated voltage and measurement category, and keep student practicals to low-voltage circuits.

Why Choose LabEquip

Schools and colleges usually buy multimeters in class sets so each pair has its own meter for circuit work. LabEquip lists this meter in Physics Equipments, and a further digital multimeter listing is also available; the differences between the two models can be confirmed when you enquire. Use the LabEquip contact page for quantities.

Frequently Asked Questions

What does OL on the display mean?

OL stands for overload or open loop. It appears when the quantity is larger than the selected range can show, or when measuring resistance across an open circuit. Switch to a higher range, or check the connections.

What is the difference between auto-ranging and manual-ranging meters?

An auto-ranging meter selects the range itself, which is convenient but can be slow to settle. A manual-ranging meter needs the user to pick a range, which teaches students about orders of magnitude. Which type this model is should be checked in its specification.

Why does the meter show a small reading with the leads unconnected?

On sensitive voltage ranges the high input resistance picks up stray electric fields, so a few digits may wander. The reading drops to zero once the leads are connected across a real source or shorted together.

How do I measure the current in a circuit?

Switch off, break the circuit at the point of interest, move the red lead to the current socket, select a current range and connect the meter so the current flows through it. Start on the highest current range and move down.

Why does the voltage of a cell drop when it supplies current?

Some of the cell’s emf is used to drive current through its own internal resistance. The larger the current, the larger that internal voltage drop and the lower the terminal voltage measured by the meter.

Can the meter test a diode?

Many digital multimeters have a diode test that passes a small current and shows the forward voltage drop, typically a few tenths of a volt for silicon. Reversing the leads should give an overload reading. Check that this model has the function.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)