Search

In Stock

Device with a Free-Moving Disk and Three Gyroscopes

Precision Low-Friction Bearing Platform: Enables smooth, unrestricted disk rotation for accurate momentum analysis.

Tri-Gyroscope Configuration: Supports comparative study of simultaneous gyroscopic effects and rotational transfer.

₹1,023.00

Quick Answer: The Device with a Free-Moving Disk and Three Gyroscopes is rotational dynamics apparatus in which a disk that can move with very little friction is combined with three gyroscopes. Changing a gyroscope’s spin, or tilting its axis, makes the disk respond, so students can watch angular momentum being conserved and exchanged.

Angular Momentum in a Closed System

A spinning rotor has angular momentum L = Iω, a vector along its spin axis whose size depends on its moment of inertia and spin rate. When no external torque acts on a system, its total angular momentum stays constant. If a gyroscope carried by a freely turning disk is speeded up, slowed down or tilted, the change in its angular momentum must be balanced by an equal and opposite change elsewhere, and the only place available is the disk, which starts to rotate.

This is the principle of the reaction wheels used to turn satellites and space telescopes without firing thrusters: spinning a wheel one way inside the spacecraft turns the craft the other way. With three gyroscopes, angular momentum can be stored and exchanged about different axes, which shows students that the conservation law applies to each component of a vector quantity, not just to a single number.

Topics It Supports

  • Conservation of angular momentum in an isolated system
  • Precession rate and its dependence on spin rate and torque
  • Reaction wheels and attitude control of satellites
  • Angular momentum as a vector with components about three axes
  • Gyroscopic stability in bicycles, ships and navigation instruments

Precession and Gyroscopic Torque

When a torque acts on a spinning gyroscope, its spin axis does not tip in the direction of the push; instead it swings at right angles, a motion called precession. The rate of precession equals the applied torque divided by the gyroscope’s angular momentum, so a fast-spinning rotor precesses slowly. With the gyroscopes coupled to a free-moving disk, the reaction to forcing a gyroscope axis round appears as a torque on the disk. How the three gyroscopes are mounted, driven and arranged on this device should be confirmed, as the listing names the components but not their layout.

Specifications

Apparatus Free-moving disk combined with three gyroscopes
Physics shown Angular momentum conservation, precession, gyroscopic coupling
Key condition Low friction, so external torques are small
Level Undergraduate and advanced secondary mechanics
Gyroscope mounting, drive method and disk support Confirm at enquiry

Care & Handling

  • Keep hands, hair and loose clothing away from spinning rotors, and let them stop before handling.
  • Spin the gyroscopes up gradually with the method intended for them; over-speeding stresses bearings.
  • Keep the disk’s bearing or support surface clean and level, since dust and tilt add the friction the experiment tries to avoid.
  • Store the device covered, with rotors at rest and any drive cords removed.

Why Choose LabEquip

Universities and senior physics departments buy apparatus like this for rotational mechanics, usually as a demonstration bench rather than a class set. It is listed in LabEquip’s Physics Equipments; a gimbal-mounted gyroscope experiment apparatus suits introductory precession work. Send configuration questions through the LabEquip contact page.

Frequently Asked Questions

Why does the disk turn when a gyroscope is spun up?

The disk and gyroscopes together form a system with almost no external torque, so their total angular momentum stays the same. Giving a gyroscope angular momentum in one direction requires the disk to gain an equal amount in the opposite direction.

What is precession?

Precession is the slow turning of a spinning object’s axis when a torque acts on it. The axis moves at right angles to the applied force, at a rate equal to the torque divided by the angular momentum.

Why is low friction important?

Friction at the disk’s support is an external torque. If it is large, angular momentum leaks out of the system and the disk’s response is weak or absent, hiding the conservation law the apparatus is designed to show.

How is this related to satellite control?

Many spacecraft carry reaction wheels on three axes. Speeding up or slowing a wheel turns the spacecraft the opposite way, letting it point instruments accurately without using fuel, the same exchange of angular momentum seen between the gyroscopes and the disk.

Why does a spinning gyroscope resist being turned?

Changing the direction of its spin axis means changing its angular momentum, which requires a torque. The faster the rotor spins, the larger the angular momentum and the larger the torque needed to turn its axis quickly.

Is angular momentum conserved separately about each axis?

Yes, when no external torque acts. Angular momentum is a vector, so each of its three components is conserved on its own, which is why gyroscopes on different axes can exchange angular momentum with the disk in different directions.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)